3M™ beskyttende overtræksbeklædning tilbehør Teknisk Datablad

Share on Social Networks

Share Link

Use permanent link to share in social media

Share with a friend

Please login to send this document by email!

Embed in your website

Select page to start with

4. Occupational Health and Environmental Safety Division 3M Center Building 235-2NW-70 St. Paul, MN 55144-1000 3M Canada Company OH&ESD P.O. Box 5757 London, Ontario N6A 4T1 Canada For More Information Technical Assistance in U.S. 1-800-243-4630 3M.com/PPESafety or m.3M.com/PPESafety Technical Assistance in Canada 1-800-267-4414 3M.ca/PPESafety 3M is a trademark of 3M, used under license in Canada. Please recycle. Printed in USA. © 3M 2012. All rights reserved. 75-0501-0816-8 For more information on 3M products and services please contact 3M. Important Notice This guide is only an outline. Before using any protective apparel or accessories, the wearer must read and understand the user information for each product. Specific country legislation should be observed. If in doubt, contact a safety professional. Selection of the most appropriate PPE and accessories will depend on the intended use and should only be made by a competent person knowledgeable of the actual working conditions and the limitations of PPE and accessories. Final determination as to the suitability of these products for a particular use is the employer’s responsibility. This information is subject to revision at any time. If you have questions, contact 3M Technical Service.

3. Description The 3M ™ Hairnet 407 is made from a white, breathable, spunbond polypropylene material. It is designed to help prevent the wearer’s hair from contaminating the work environment. Composition and Key Features • 12 gsm polypropylene • Elastic around the head band for a secure fit • Soft, light-weight and breathable for comfortable wear Sizing - Universal 3M ™ Hairnet 407 Opening diameter 5-12 in (13-30cm) 3M ™ Lab Coat 4400 3M ™ Lab Coat 4440 3M ™ Overshoe 402 3M ™ Overboot 440 3M ™ Oversleeve 444 3M ™ Overhood 446 3M ™ Overshoe 442 3M ™ Overboot 450 3M ™ Hairnet 407 CE Category 1, for use in low risk applications Non CE Category. These products are sold as accessories and are not certified under the CE Personal Protective Equipment directive Description The 3M ™ Overhood 446 is made from a white, laminated material, it is designed to help protect the wearer’s head from limited liquid chemical splashes and dusts when used in conjunction with suitable PPE. It may also help reduce contamination of the working environment. Composition and Key Features • 47 gsm polypropylene/polyethylene laminate • Elastic around the face area with 4-thread over lock stitching to protect the wearer • Low-linting • Anti-static treated Sizing – Universal 3M ™ Overhood 446 Height 18 in (46 cm) Depth at chin 14 in (36 cm) Face opening diameter 3-7.5 in (8-19 cm) Slit height 7 in (18 cm) Width of base (flattened) 18 in (46 cm) Chin to base 8 in (20 cm) All dimensions are nominal Accessory Storage and Disposal • Store in dry, clean conditions in original packaging, away from direct sunlight, sources of high temperature, and solvent vapors • Store within the temperature range -20°C to +25°C (-4°F to +68°F) and with relative humidity below 80% • Expected shelf life is three years from date of manufacture when stored as stated • Replace product if damaged, heavily contaminated or in accordance with local regulations • Handle and dispose of contaminated product with care and in accordance with applicable regulations Care Instructions CE Personal Protective Equipment Categories A risk assessment should be carried out by trained safety professionals to ensure that appropriate PPE and accessories are selected and worn correctly. 2 Do not wash Do not dry-clean Do not bleach Flammable Do not iron Limited use Do not dry Warnings and Limitations Before use, read and understand all user information and be sure that the product is suitable for the application and fitted correctly. Product must never be altered or modified. Do not use for: • Contact with heavy oils, sparks or flame, or combustible liquids • Environments with high mechanical risks (abrasions, tears, cuts) • Protection against hazardous substances • Environments with conditions of excessive heat

1. Description The 3M ™ Lab Coat 4400 and 3M ™ Lab Coat 4440 are designed to help protect the wearer against non-hazardous dusts and non-hazardous light liquid splashes where the garment covers. They are lightweight and comfortable to wear. 3M ™ Lab Coat 4400 3M ™ Lab Coat 4440 Introduction This Technical Data Sheet covers the products that are offered as accessories within the range of disposable protective apparel from 3M for use in non-hazardous applications. Typical applications may Technical 3M ™ Protective Apparel Accessories Data Sheet Height Chest S 57 – 62 in (144 – 157 cm) 28 – 32 in (71 – 81 cm) M 60 – 67 in (167 – 176 cm) 32 – 36 in (81 – 91 cm) L 65 – 70 in (174 – 181 cm) 36 – 38 in (91 – 97 cm) XL 68 – 73 in (179 – 187 cm) 38 – 40 in (96 – 101 cm) XXL 71 – 75 in (186 – 194 cm) 40 – 43 in (101 – 109 cm) 3XL 73 – 77 in (194 – 200 cm) 43 – 46 in (109 – 117 cm) 4XL 74 – 78 in (200 – 206 cm) 46 – 52 in (117– 132 cm) 3M ™ Lab Coat 4400 3M ™ Lab Coat 4440 • 45 gsm polypropylene • Internal pocket on the wearer’s left hand side • Elastic wrists for enhanced fit • Zipper closing (single way) for convenience • Breathable material to help reduce heat build-up and promote comfortable wear • 55 gsm polypropylene/ polyethylene laminate • Knit polyester cuffs for comfortable wear • Anti-static treated • Zipper closing (single way) for convenience • Low-linting • Microporous material to help reduce heat build-up and promote comfortable wear Sizing for 3M ™ Lab Coat 4400 and 3M ™ Lab Coat 4440 An appropriate size garment should be selected to allow sufficient movement for the task while maintaining a secure fit. September 12 3M ™ Lab Coats 4400/4440 3M ™ Overshoes 402/442 3M ™ Overboots 440/450 3M ™ Oversleeves 444 3M ™ Overhood 446 3M ™ Hairnet 407 All dimensions are nominal Composition and Key Features include general maintenance, electronics manufacturing, catering, cleanrooms, beauty industries, hygiene, and laboratories. None of these products contain natural rubber latex.

2. Description The 3M ™ Oversleeve 444 is made from a white, laminated, low-linting material. Worn on the lower arms, they are designed to help protect the wearer’s clothing from limited liquid chemical splashes and dusts, and may also help reduce contamination of the working environment. Composition and Key Features • Made from 47gsm polypropylene/polyethylene laminate • 3M oversleeve 444 has elastic at the top and bottom of the sleeve • Anti-static treated 3M ™ Oversleeve 444 3M ™ Oversleeve 444 Length 22 in (56 cm) Lower Cuff diameter 2.25-4.5 in (6-12 cm) Upper Cuff diameter 3-6 in (7-15 cm) Sizing – Universal All dimensions are nominal Description The 3M ™ Overshoe 402 is made of a light blue polypropylene, low- linting non-woven material. The 3M ™ Overshoe 442, 3M ™ Overboot 440, and 3M ™ Overboot 450 are made of a white laminated, low- linting material. They are designed to help protect the wearer’s footwear from limited liquid chemical splashes and dusts, and may also help reduce contamination of the working environment. Composition and Key Features 3M ™ Overshoe 402 3M ™ Overboot 440 3M ™ Overshoe 442 3M ™ Overboot 450 Dimensions (measured flat) 3M ™ Overshoe 402 3M ™ Overshoe 442 3M ™ Overboot 440/450 Height 6 in (15 cm) 7 in (18 cm) 17 in (43 cm) Length 10-15 in (25-38 cm) 15 in (38 cm) 15 in (38 cm) Opening diameter 4-6 in (1.5-15 cm) 3-6 in (8-15 cm) 3-6 in (8-15 cm) Tie length n/a n/a 20 in (50 cm) 3M ™ Overshoe 402 3M ™ Overshoe 442 • Blue 40gsm non-woven polypropylene • Sole is the same material as the uppers • Elastic top and bottom for enhanced fit • Anti-static treated • White 55gsm polypropylene/ polyethylene laminate • Sole is the same material as the uppers • Elastic top for enhanced fit • Anti-static treated 3M ™ Overboot 440 3M ™ Overboot 450 • White 55gsm polypropylene/ polyethylene laminate • Sole is the same material as the uppers • Elastic top for enhanced fit • Anti-static treated • Ties made from the same material as the uppers • White 55gsm polypropylene/ polyethylene laminate • PVC sole to help reduce slipping • Elastic top for enhanced fit • Anti-static treated • PVC ties Sizing – Universal All dimensions are nominal 3M ™ Overshoe 402 3M ™ Overshoe 442 3M ™ Oversleeve 444 3M ™ Overboot 440/450

Views

  • 658 Total Views
  • 554 Website Views
  • 104 Embeded Views

Actions

  • 0 Social Shares
  • 0 Likes
  • 0 Dislikes
  • 0 Comments

Share count

  • 0 Facebook
  • 0 Twitter
  • 0 LinkedIn
  • 0 Google+