True
ID: 171
Views
165 Total Views
0 Members Views
165 Public Views
Share on Social Networks
Share Link
Use permanent link to share in social media
Share by mail

Please login to share this document by email.

Embed in your website
Select page to start with

2. 3M United Kingdom 3M Centre Cain Road, Bracknell Berkshire RG12 8HT Tel: 0870 60 800 60 www.3M.co.uk/ohes 3M Ireland Limited The Iveagh Building The Park, Carrickmines Dublin 18 Tel: 1 800 320 500 Please recycle. Printed in United Kingdom © 3M 2011. All rights reserved 3M Safety Solutions 3M Health & Safety Helpline 0870 60 800 60 (UK) 1 800 320 500 (Ireland) CH45 65 DS Iss 1 Applications and Performance Non - Hazardous Particulates Yes Hazardous Dusts & Fibres Yes Non - Hazardous Liquid Splash Yes Hazardous Liquid Sp lash Yes, if chemical is compatible with suit material† Non - Hazardous Liquid Spray Yes Hazardous Liquid Sp ray Yes, if chemical is compatible with suit material† Liquid Continuous Contact/ Immersion No Acids/Alkalis Yes, if chemical is compatible with suit material† Gases and Vapours No Organic Solvents Yes, if chemical is compatible with suit material† † The chemicals against which the product has been tested and certified are listed in the user instructions. For additional chemical penetration data, please contact 3M on 0870 60 800 60 (UK) or 1 800 320 500 (Ireland). Typical applications may include: asbestos handling, paint spraying, agriculture, pharmaceutical manufacturing, tank cleaning, healthcare and chemical mixing and handling. In all cases, a risk assessment should be carried out. Always read product user information. Use limitations and perfo rmance data should be considered to ascertain the protection required. If in doubt, contact a safety professional. The table below shows the performance of this product when tested under laboratory conditions. Please note that the tests may not reflect t he reality of use and do not account for factors such as excessive heat and mechanical wear. Note: The maximum Class is 6 unless otherwise noted. Test Standard / Test Method Class / Result Abrasion resistance (visual assessment) EN 530:1994 Class 1 Flex cracking (visual assessment) ISO 7854:1995 Class 1 Tear resistance ISO 9073 - 4 :1997 Class 1 Tensile strength EN ISO 13934 - 1:1999 Class 1 Puncture resistance EN 863:1995 Class 1 Burst resistance EN ISO 13982 - 2:1999 Class 1 Resistance to ignition EN 13274 - 4:2001 Pass Resistance to blocking EN 25978:1990 No Blocking Seam strength EN ISO 13935 - 2:1999 Class 2 Repellency to liquids – 30% H 2 SO 4 EN ISO 6530:2005 Class 3 of 3 Liquid penetration resistance – 30% H 2 SO 4 EN ISO 6530:2005 Class 3 of 3 Repellency to liquids – 10% NaOH EN ISO 6530:2005 Class 3 of 3 Liquid penetration resistance – 10% NaOH EN ISO 6530:2005 Class 3 of 3 Permeation 30% H 2 SO 4 – fabric & seam EN374 - 3:2003 Class 6 Permeation 10% NaOH – fabric & seam EN374 - 3:2003 Class 6 Anti - static coating on both sides EN 1149 - 1:2006 Pass Radioactive particulates (TIL) EN 1073 - 2:2002 Class 2 of 3 Biological protection EN 14126:2003 Synthetic blood penetration resistance ISO 16603:2004 Class 6 of 6 Blood - borne pathogen penetration resistance ISO 16604:2004 Fail Contaminated solid particle penetration resistance ISO 22612:2005 Class 3 of 3 Contaminated liquid aerosol penetration resistance ISO/DIS 22611:2003 Class 3 of 3 Wet bacteria penetration resistance EN ISO 22610:2006 Class 6 Important Notice This guide is only an outline. It should not be used as the only means for selecting protective clothing. Before using any protective clothing, the wearer must read and understand the user instructions for each product. Specific country legislation must be observed. If in doubt, co ntact a safety professional. Selection of the most appropriate PPE will depend on the particular situation and should only be made by a competent person knowledgeable of the actual working conditions and the limitations of PPE. Final determination as to the suitability of these products for a particular situation is the employer’s responsibility. This information is subject to revision at any time. Always read and follow all User I nstructions supplied with your 3M™ Protective Coveralls in order to ensure correct operation. If you have questions contact 3M Technical Service. LIMITATION OF LIABILITY: Except as provided above, 3M shall not be liable or responsible for any loss or dama ge, whether direct, indirect, incidental, special or consequential arising out of the sale, use or misuse of 3M OH&ESD products, or the user’s inability to use such products.

1. 3M TM 4565 Protective Coverall The 3M ™ 4565 Protective Coverall is designed to help protect a gainst: hazardous dusts (Type 5); certain light l iquid splashes (Type 6) and certain light liquid sprays (Type 4) . Key Features • Excellent protection against dusts and certain liquid splashes and sprays • Taped seams for additional protection • Elasticated waist and ankles for convenience and freedom of movement • Elasticated hood with three panel design • Knitted cuffs for increased comfort • Two - way zipper with sealable storm flap • Offers protection against certain biohazards (see class data) • Low linting Comfort and Protection Liquid Protection Type 6 - Light Liquid Splashes ( EN 13034:2005 + A1:2009 ) Liquid Protection Type 4 – Liquid Spray (EN 14605:2005 + A1:2009) Dust Protection Type 5 - Solid Airborne Particulates EN ISO 13982 - 1:2004 Anti - static Anti - static coating * on both sides (EN 1149 - 5:2008) Nuclear Radioactive particulates Class 2 (EN 1073 - 2:2002 except EN863 puncture) Biohazard Types 4 - B, 5 - B & 6 - B – Infective Agents (EN 14126:2003 except ISO 16604) * All apparel must be suitably grounded for anti - static treatment to be effective. Does not offer protection against radiation. Approvals CE approved under PPE Directive (89/686/ECC), Category III Article 10 Certification: BTTG Testing & Certification Ltd. Notified Body Number: 0338 Article 11B Supe rvision: SGS United Kingdom Ltd. Notified Body Number: 0120 Materials Suit Poly ethylene + Polyester / Polyethylene Laminate Zipper Metal / Nylon / Polyester Braid Elastic Neoprene r ubber Cuffs Polyester Thread Polyester / cotton Tape Polypropylene, red This product does not contain components made from natural rubber latex. Sizing An appropriate size garment should be selected to allow sufficient movement for the task. Height Chest S 64 – 67 in 164 – 170 cm 33 - 36 in 84 – 92 cm M 66 – 69 in 167 – 176 cm 36 – 39 in 92 – 100 cm L 69 – 71 in 174 – 181 cm 39 – 43 in 100 – 108 cm XL 70 – 74 in 179 – 187 cm 43 – 45 in 108 – 115 cm XXL 73 – 76 in 186 – 194 cm 45 – 49 in 115 – 124 cm 3XL 76 – 78 in 194 – 200 cm 49 – 52 in 124 – 132 cm 4XL 78 – 81 in 200 – 206 cm 52 – 55 in 132 – 140 cm Storage and Disposal • Store in dry, clean conditions in original packaging, away from direct sunlight, sources of high temperature, and solvent vapours • Store within the temperature range - 20°C to +25°C ( - 4°F to +68°F) and with relative humidity below 80% • Expected shelf life is three years from date of manufacture when stored as stated • Replace garments if damaged, heavily contaminated or in accordance with local work practice or regulations • Handle and dispose of contaminated garments with care and in accordance with applicable regulations Limited Use Do not wash Do not dry clean Do not bleach Flammable — keep away from sparks or flames Do not iron Single Use - do not re - use Do not tumble dry Warnings and Limitations Before use read and understand all user instructions and be sure that the product is suitable for the application and fitted correctly. Product must never be altered or modified. Do not use for : • Contact with heavy oils, sparks or flame, or combustible liquids; • Envir onments with high mechanical risks (abrasions, tears, cuts); • Contact with hazardous substances beyond Type 4/5/6 certification; • Environments with conditions of excessive heat.

To install this Web App in your iPhone/iPad press and then Add to Home Screen.