1. Bump & Calibration Gas Gas Offering for Portable and Fixed Instruments Long shelf life Supply on demand Part number: C03288 Flow rate 0.5 LPM Stainless steel
2. Compliant Certificate of conformity All cylinders come with Certificates of Analysis showing actual gas values, and ensuring full traceability. Reliability Long shelf life for reactive gases More bump and calibrations from the cylinder before it expires, therefore cost effective and reduces waste Wide range of calibration gas The convenience of having the gas you need to calibrate or bump test your fleet (see back page for list) Supply of gas when you need it With distribution centres across Europe, Crowcon offer a flexible service t hat allows us to get the gas required to you in the shortest time possible User friendly Fast shipment times You have the right gas when you need it, no down-time With regulations driving tighter calibration routines and the requirement for daily bump testing, there is a real need for test gas. Gas detectors play a key part for people and plant safety so equipment cannot afford to be out of service. At Crowcon, we understand our customer’s requirements. We now o ffer a full range of bump and calibration gas, with a range of accessories for all your portable and fixed gas detector testing and calibration needs. We have gas distribution centres in the UK, mainland Europe, Si ngapore, UAE and North & South America, so it has never been easier to buy the gas you require, ensuring your fleet of fixed and portable devices are compliant. Bump & Calibration Gas Bump Testing Compliance
3. Making bump testing easier Bump testing has always been a challenge for mobile users with the difficulties and cost of transporting gas and regulators. After listening to your needs, Crowcon have fou nd a solution to make bump testing easier. Crowcon’s Bump Gas Spray is a can that comes with a nozzle for easy testing of equipment. Simply attach the straw onto the nozzle and spray a small amount of ga s into the unit’s calibration cap. The unit will then go into alarm and show you that it is fully functional with audible and visual checks. This is purely for bump testing and cannot be used for calibrat ions. For further information, Contact Crowcon. Free-of-charge shipping of calibration and bump gas Gas has always been expensive to ship. At Crowcon we have addre ssed this to make our customer’s lives easier, therefore we now offer free of charge shipping to customers within the following regions: Part number Bump gas description G5-QUINT-3-12 12 litre spray can with push button and spray straw, mix 25ppm H 2 S/100ppm CO/2.2% methane/0.5% CO 2 /18% O 2 in nitrogen G4-QUINT-5-12 12 litre spray can with push button and spray straw, mix 25ppm H 2 S/100ppm CO/2.2% methane/18% O 2 in nitrogen G1-CO-100-N-12 12 litre spray can with push button and spray straw, mix 100ppm CO in ni trogen G1-H2S-25-N-12 12 litre spray can with push button and spray straw, mix 25ppm H 2 S in nitrogen G1-O2-18-N-12 12 litre spray can with push button and spray straw, mix 18% by vol. O 2 in nitrogen Zone 1 Zone 2 Zone 3 Austria Belgium Denmark Finland France Germany Holland Ireland Italy Luxembourg Monaco Sweden UK Czech republic Hungary Liechtenstein Switzerland This is based on a multiple of 6 cylinders of mixed or single that are 112L or smaller. For 12L spray cans, a minimum of 12 must be ordered to receive FOC shipments to these zon es. For more information on your area please contact your local office.
4. www.crowcon.com © 2019 Crowcon Detection Instruments Ltd. Copyright to some photographs held separately. Calibration gas Description Ni-Br regulator Stainless steel regulator Non-reactive gases Suitable Suitable H 2 S Suitable Suitable SO 2 Suitable Suitable NO Not recommended Suitable NO 2 Not recommended Suitable CI 2 Not suitable Suitable HCI Not suitable Suitable HCN Not suitable Suitable NH 3 Not suitable Suitable PH 3 Not suitable Suitable ETO Not suitable Suitable SiH 4 Not suitable Suitable Accessories Part number: C03129 Flow rate 0.5 LPM Brass (Ni-Br) Part number: C03288 Flow rate 0.5 LPM Stainless steel Part number: C03052 Flow rate 0.5 LPM Brass (Ni-Br) Part number: C02099 Flow rate 1 LPM Brass (Ni-Br) Part number: C03168 Flow rate 01.0 LPM Brass (Ni-Br) Part number: C03332 Flow rate 0-1 LPM * All the above regulators will fit 34L, 60L and 112L gas cylinders Fixed flow regulator with test cap and tubing Fixed flow regulator with on/off switch Fixed flow regulator with on/off switch Fixed flow regulator with on/off switch for reactive gases Fixed flow push trigger regulator Demand flow regulator Crowcon reserves the right to change the design or specification of the product without notic e.
To install this Web App in your iPhone/iPad press and then Add to Home Screen.