Dustmaster Turbo

Share on Social Networks

Share Link

Use permanent link to share in social media

Share with a friend

Please login to send this presentation by email!

Embed in your website

Select page to start with

1. RE PA IR KI T 33 B 33A SER VICE MODULE 33 14 36 37 12 11 34 10 3M ™ Powered & Supplied Air Respirators Before Use • Ensure Battery is fully charged • Check airflow – Insert airflow indicator into Turbo outlet, turn on, if ball fails to rise above line change the filter and re-check airflow • Ensure Gasket is replaced every time filter is changed • Inspect Breathing Tube – ensure it is free from splits or holes. Replace if necessary • Inspect Belt – ensure it is free from splits or tears and the buckle is undamaged Monthly • Carry out all the ‘Before Use’ inspections and create record of this monthly check for the turbo Additional Checks • Listen for unusual motor noise. Replace blower unit if necessary After Use • Clean casing with cloth dampened with a mild solution of water and liquid household soap • Disinfect with 3M ™ 105 Wipes • Charge Battery • Store in a dry, clean area / locker away from direct sunlight, high temperatures and solvents Ordering Consumables, Repair Parts and Accessories To request a quote or place an order for these items, please contact your 3M Approved Distributor. Further Information and Advice If you require additional guidance on the Care and Maintenance of your 3M Powered and Supplied Air Equipment, please contact the Helpline or your local 3M representative. 3M Health and Safety Helpline 0870 60 800 60 (UK) 1 800 320 500 (Ireland) 3M Part Number 33 Dustmaster turbo unit (complete with belt, battery pack, airflow indicator and P2 filter). 021-00-38P Dustmaster Powered Air Turbo Kit. Contains a standard Dustmaster Powered Air Turbo Unit, Pre-filter, Lightweight Breathing Tube and a Battery Charger RTUDUSTMASTERUK 33A Dustmaster turbo unit service module 021-00-65P 33B Dustmaster turbo unit repair kit 021-00-66P4 34 Blower unit kit 021-15-03P 36 Airflow indicator 021-14-03P 14 Comfort belt 022-25-03P4 Braces (if used with comfort belt) 022-25-10P4 Decontamination comfort belt BLT-12 Belt clip for Dustmaster BLT-16 37 Belt 301-00-62P5 Single station battery charger 240V 003-00-38P 10 Battery Pack BAT-23 11 Pre-filter 462-05-00P10x10 12 Dust filter (P2) with gasket 451-00-02P5 12 Dust and odour filter with gasket 451-01-20P5 12 High efficiency P3 dust filter with gasket 451-02-20P5 Care and Maintenance Please recycle. Printed in the United Kingdom. © 3M 2009. All rights reserved. Repl A ce A ll d AMA ged p AR t S i MM edi A tely to en S u R e co RR ect level S of p R otection The powered air turbo for protection against dusts, welding fumes and nuisance odours. 3M ™ Dustmaster ™ Powered Air Turbo Unit To maintain protection levels, optimise the effective lifetime of the system and avoid the additional cost of replacement, it is extremely important to carry out regular checks and maintenance on Powered and Supplied Air Respirators.

Views

  • 269 Total Views
  • 249 Website Views
  • 20 Embeded Views

Actions

  • 0 Social Shares
  • 0 Likes
  • 0 Dislikes
  • 0 Comments

Share count

  • 0 Facebook
  • 0 Twitter
  • 0 LinkedIn
  • 0 Google+

Embeds 1

  • 1 185.181.116.155