True

English Chemsplash Catalogue

ID: 1758
Views
795 Total Views
0 Members Views
795 Public Views
Share on Social Networks
Share Link
Use permanent link to share in social media
Share by mail

Please login to share this document by email.

Embed in your website
Select page to start with

1.

27. 27 www.chemsplash.com websales@chemsplash.com +44 (0) 1942 885060 Notes

28. UK Address: Unit 3 Astley Park Estate, Kennedy Rd, Astley, Manchester, M29 7JY, United Kingdom Phone: +44 (0) 1942 885060 Fax: +44 (0) 1942 885055 E-mail: websales@chemsplash.com Web: www.chemsplash.com Worldwide Distributor Experienced Technical Support Large Stocks Private Label Options Available EU Address : Chemsplash Europe Limited Sp.z o.o. Magazynowa 5A, 62-023 Gądki, Poznan, Poland Phone: +48 95 8881005 E-mail: websales@chemsplash.com Web: www.chemsplash.com

4. 4 www.chemsplash.com websales@chemsplash.com +44 (0) 1942 885060 TEST METHOD TYPE 3 EN 14605 Liquid Jet Suits Determination of resistance to penetration by a jet of liquid • Fabric, seams and joints being tested with intense and pressurized liquid jet • Low surface tension of liquid jet • Requires coveralls with fully sealed seam • One nozzle sprays at potential weak areas of coverall including chinstrap, crotch, zipper flap and joints EN14605 TYPE 3B TYPE 4 EN 14605 Spray Tight Suits Determination of resistance to penetration by liquid spray • 4 nozzles with general overspray of liquid without penetration on coverall • Low surface tension of liquid sprays being tested on whole garment to experiment saturation of fabric • Fabric, seams and joints being tested without pressurized liquid spray EN14605 TYPE 4B TYPE 5 EN ISO 13982-1 Particulate Tight Suits Determination of inward leakage of aerosols & solid par - ticles • Spray cabin filled with particles • The test is performed by a real person, aims to simulate daily use • Subject (real person) performs 3 exercises on treadmill • Particle inward leakage(IL) and total inward leakage(TIL) must meet test requirements EN13982-1 TYPE 5B TYPE 6 EN ISO 13034 Reduced Spray Suits Determination of resistance to penetration by reduced liquid spray • 4 nozzles with general overspray of liquid without penetration on coverall • Low surface tension of liquid sprays being tested on whole garment to experiment saturation of fabric • Fabric, seams and joints being tested without pressurized liquid spray • About 40% of the liquid spray is loaded onto the suit compared with Type 4 test EN13034 TYPE 6B 1 m 1.5 m 1.5 m

26. 26 www.chemsplash.com websales@chemsplash.com +44 (0) 1942 885060 Style Code 2544 2503 2513 2511 2626 2792 2510 2518 2597 2648 2727 Product Name Xtreme SMS 50 Xtreme SMS 50 AS Xtreme SMS 50 FR Eka 55 Eka 55 with feet Delta 67 Cool 67 Pro 63 Pro +4 AV MAX Jet Spray 88 Type Type 5/6 Type 5/6 Type 5/6 Type 5B/6B Type 5B/6B Type 5B/6B Type 5/6 Type 5B/6B Type 4B/5B/6B Type 4B/5B/6B Type 3B/4B/5B/6B CE Certification Material Weight 50 GSM 50 GSM 50 GSM 55 GSM 55 GSM 67 GSM 67 GSM 63 GSM 67 GSM 67 GSM 88 GSM Size Range S - 3XL S - 3XL S - 3XL S - 6XL S - 3XL S - 3XL S - 3XL S - 3XL S - 3XL S - 3XL S - 3XL Colours Available White Blue Red Orange White Blue White Blue White Blue* Orange* * Code 2636 White White Blue* Orange* * Code 2776 ▐ White with Blue Back White * With Collar, No Hood. Code 2519 With Hood & Feet. Code 2607. I White with Orange Seams I White with Red Taped Seams Yellow Suitable Applications General Maintenance, Light Duty Cleaning, Handling Powders, Insulation Asbestos Related Work Cement Manufacturing, Wood & Metal Processing Petrochemical Industry, Industrial Cleaning Pharmacuetical Industries, Toxic Powders Paint Spraying Agriculture Cleanrooms Crime Scene Investigation Toxic Spraying, Chemical Handling Chemical Spills, Decontamination Work Medical * Available Anti-Static Code 2503 Coverall Quick Guide TYPE 5 TYPE 6 TYPE 5 TYPE 6 ANTI-STATIC TYPE 5 TYPE 6 ANTI-STATIC TYPE 5B TYPE 5B TYPE 6B TYPE 6B ANTI-STATIC ANTI-STATIC TYPE 5B TYPE 6B NUCLEAR PARTICLES CLASS 2 NUCLEAR PARTICLES CLASS 1 NUCLEAR PARTICLES CLASS 1 NUCLEAR PARTICLES CLASS 1 NUCLEAR PARTICLES CLASS 2 ANTI-STATIC INFECTIVE AGENTS INFECTIVE AGENTS INFECTIVE AGENTS TYPE 5 TYPE 6 NUCLEAR PARTICLES CLASS 1 ANTI-STATIC TYPE 5B TYPE 6B NUCLEAR PARTICLES CLASS 1 ANTI-STATIC INFECTIVE AGENTS TYPE 4B TYPE 5B TYPE 6B NUCLEAR PARTICLES CLASS 2 ANTI-STATIC INFECTIVE AGENTS TYPE 4B TYPE 5B TYPE 6B NUCLEAR PARTICLES CLASS 3 ANTI-STATIC INFECTIVE AGENTS TYPE 6B TYPE 3B TYPE 4B TYPE 5B NUCLEAR PARTICLES CLASS 1 ANTI-STATIC INFECTIVE AGENTS This sheet provides a rough guide. A full risk assessment should be carried out to determine product selection. See product user instructions for full details and further CE Certification information.

3. 3 www.chemsplash.com websales@chemsplash.com +44 (0) 1942 885060 Gas Tight Spray Tight Light Protection Liquid Tight Light Spray Tight & Particulate Tight Protective clothing is designed to resist various hazardous situations. Regulation (EU) 2016/425 indicates the categories of risk against which PPE is intended to protect users. Chemical protective clothing complies with Category III, which includes exclusively the risks that may cause very serious consequences such as death or irreversible damage to health. The requested certification is explained below. Standards For Protective Clothing EN14605 TYPE 3B EN14605 TYPE 4B TYPE 1 EN13982-1 TYPE 5B EN13034 TYPE 6B EN1149-5 Anti-static EN1073-2 Radioactive Particles DIN 32781 Protective Against Pesticides EN14126 Infective Agents TYPE 3 EN 14605 Liquid Tight Suits Suits which can protect against strong and directional jets of a liquid chemical such as spray from a burst pipe under pressure. Requires a barrier fabric and sealed seams. TYPE 4 EN 14605 Spray Tight Suits Suits which can protect against saturation of liquid chemical, where the volume of the liquid builds up on the suit forming pools, resulting in rivulets. Requires a barrier fabric and sealed seam. TYPE 1 EN 943-1 Gas Tight Suits Protective clothing against dangerous solid, liquid and gaseous chemicals, including liquid and solid aerosols. TYPE 6 EN 13034 Reduced Spray Suits Suits for protection against light spray and splashes of liquid chemicals where there is no directional spray or build up of liquid on the suit, but there may be a fine mist of droplets in the atmosphere. ANTI-STATIC EN 1149-5 Protection against static electricity or charge decay. AGAINST LIMI T ED FLAME SPREAD PROTECTION EN ISO 14116 Limited flame spread materials, material assemblies, and clothin g. Index 1: all materials and assemblies. TYPE 5 EN ISO 13982-1 Dry Particle Suits Suits for protection against hazardous dry particles AGAINST RADIOACTIVE PARTICLES EN 1073-2 Protective clothing against particulate radioactive contamination. Suits for protection against hazardous dry particles DIN 32781 Protection against handling and spraying pesticides AGAINST BIOLOGICAL HAZARDS EN 14126 Protection against biological hazards and infective agents. EN14116 Index 1 TY PE 1 TY PE 3 TY PE 4 TY PE 5/6 CATEGORY 1 Against Gases, Aerosols, Liquids And Solid Chemicals Against Saturated Liquid Splash Against Liquid Spray & Harmful Particulates Against Pressurized Liquid Jet Use For non-hazardous Environment HIGH LOW Protection Level

2. 2 the company... Chemsplash.com’s reputation is built on the consistent high quality of it’s products, it's technical expertise and underlying focus of delivering excellent service. Initially starting life as a manufacturer of high performance garments for the cleanroom industry in the mid 1970’s, Chemsplash.com quickly began to make a name as a specialist manufacturing business. Building on this success the business expanded into the production of disposable PPE, producing a simple and functional range of garments. As demand for disposable PPE grew, Chemsplash’s product offering swelled to service this newly emerging and demanding market using a range of non-woven fabrics. Making the most of the huge wealth of knowledge and expertise that 40+ years of manufacturing has provided us, Chemsplash.com now boasts a strong and diverse product range - Disposable Workwear, Cleanroom Clothing & Conservation Products. Chemsplash.com is built around our own brands; Chemsplash, Conservation Covers & Accessories, whilst still offering a comprehensive range of products made in DuPont’s Tyvek ® & Tychem ® fabrics and other non-wovens. contents... the website... ● View our full range of products - incluwg stock availability and your special contract pricing. ● Earn Loyalty Points and Save 1% on Every online Purchase you make on Chemsplash.com your loyalty points can then beconverted into vouchers or credit. ● Watch product videos and view detailed imagery of each product with zoom feature. ● Have any questions answered from our team with our live web chat feature. ● Access data specification sheets and product certification. Become a KEY DISTRIBUTOR Chemsplash Coveralls CODE DESCRIPTION MATERIAL STANDARD PAGE 2544 Xtreme SMS 50 SMS Fabric Type 5/6 6 2503 Xtreme SMS 50 AS SMS Fabric Type 5/6 7 2513 Xtreme SMS 50 FR SMS Fabric Type 5/6 8 2511 Eka 55 Microporous Laminate Fabric Type 5B/6B 9 2792 Delta 67 Microporous Laminate Fabric Type 5B/6B 10 2510 Cool 67 Microporous Laminate Fabric Type 5/6 11 2518 Pro 63 Microporous Laminate Fabric Type 5B/6B 12 2597 Pro +4 Microporous Laminate Fabric Type 4B/5B/6B 13 2648 AV MAX Microporous Laminate Fabric Type 4B/5B/6B 14 2658 AG MAX Microporous Laminate Fabric Type 4B/5B/6B 15 2727 Jet Spray 88 Heavyweight Fabric Type 3B/4B/5B/6B 16 Chemsplash Accessories 17 DuPont ® Coveralls 20 Tyvek ® Accessories 21 Chemsplash Cleanroom 23 Minimal Risk Accessories 24

5. 5 www.chemsplash.com websales@chemsplash.com +44 (0) 1942 885060 TEST METHOD EN 1149-5 Antistatic • The standard specifies a set of requirements and test methods to measure the fabric protection against static electricity or charge decay • Electrostatic resistance is required when the worker is exposed to environments where sparks could cause explosions or ignition • Coveralls according to this standard do not offer protection from main voltages EN 1149-5 Anti-static DIN 32781 • The standard specifies the minimum requirements for protective suits, used when handling and spraying pesticides. • The current performance requirements for pesticide protective clothing include rules for the strength and sealing of the material. The degree of penetration is determined by a special test method in accordance with DIN EN 14786. • Handling undiluted concentrates requires additional PPE DIN 32781 Protective Against Pesticides EN 1073-2 Against Radioactive Particles Determination of inward leakage of aerosols & solid particles • The standard was developed to be applied in the nuclear industry with no protection against ionizing radiation • The test follows the same protocols a Type 5 test with different judgement criteria • 3 classifications indicate different protection level EN1073-2 Radioactive Particles EN14116 Index 1 EN ISO 14116 Flame Retardant Test • To check whether the fabric/materials burn while contacting heat exposure • To check whether the fabric stops flame spreading if burned • Requirements for limited flame spread Index 1 including no spreading of the flame, no flaming debris, no afterglow, a hole may be formed EN 14126 Against Biological Hazards • The standard specifies a set of requirements and test methods to measure the fabric protection against infective agents • ISO 16603, ISO 16604, ISO/DIS 22611 determines penetration by blood, body fluids, blood borne and biologically contaminated aerosol • ISO 22612, ISO 22610 determines the resistance of dry and wet microbial penetration EN14126 Infective Agents EN 14126:2003 Test Requirement Resistance to penetration by blood-borne phatogens - phi-x174 bacteriophage test - EN ISO 16603/16604 Class 6 20 kPa Class 5 14 kPa Class 4 7 kPa Class 3 3.5 kPa Class 2 1.75 kPa Class 1 0 kPa Resistance to penetration by infective agents due to mechanical contact with substances containing contaminated`liquids - EN ISO 22610 (test microorganism: staphylococcus aureus) Class 6 t > 75 Class 5 60 < t ≤ 75 Class 4 45 < t ≤ 60 Class 3 30 < t ≤ 45 Class 2 15 < t ≤ 30 Class 1 ≤ 15 min Resistance to penetration by contaminated liquid aerosols - EN ISO DIS 22611 (test microorganism: staphylococcus aureus) Class 3 log > 5 Class 2 3 < log ≤ 5 Class 1 1 < log ≤ 3 Resistance to penetration by contaminated solid particles - EN ISO 22612 (test microorganism: spores of Bacillus subtilis) Class 3 ≤ 1 Class 2 1 < log ufc ≤ 2 Class 1 2 < log ufc ≤ 3

6. 6 www.chemsplash.com websales@chemsplash.com +44 (0) 1942 885060 Xtreme SMS 50 Coverall Type 5/6 Style Code: 2544 The Chemsplash Xtreme SMS 50 is made from extremely breathable SMS fabric suitable for prolonged periods of use. Featuring an elast cuffs and ankles, with a two way zip and an adhesive cover flap. Its strong and robust properties provide a good chemical barrier especially to dry hazardous particles, whilst being extremely comfortable to wear offering the best value within our Cat III Type 5 & 6 range. Features ● 50GSM Breathable SMS Fabric ● Elasticated 3 Pce Hood ● Elasticated Cuffs ● Elasticated Ankles ● Two Way Zip ● Adhesive Zip Flap ● Silicone & Latex Free Suitable Applications Asbestos Related Work Handling Powders Food Processing General Maintenance Construction Agriculture Colours Available White Blue Red Orange Sizes in CMs in compliance with EN340 Size Height Chest S 160-165 89-93 M 163-168 93-98 L 167-172 101-106 XL 173-178 108-114 XXL 176-181 116-122 XXXL 185-190 124-130 EN13982-1 TYPE 5 EN13034 TYPE 6 Version available: TAPED SEAMS Style Code: 2590 Version available: BOUND SEAMS Style Code: 2793 EN1073-2 NUCLEAR PARTICLE Class 1 Performance of whole suit Test Requirement Result /Class/Conformity Resistance to liquid penetration - Spray test Tipo 6 (EN ISO 17491-4 met. A – EN 13034) Pass Resistance to aerosol penetration - Inward leakage Tipo 5 (EN ISO 13982-2 – EN ISO 13982) IL 82/90 ≤ 30%, TILS 8/10 ≤ 15% Pass Nominal protection factor (EN ISO 13982-2 – EN 1073-2) TIL E % 30, TIL A % 20, Fpn 5 Class 1 Seams: strength (EN ISO 13935-2) > 75 N Class 3 Performance of fabric Test Requirement Result /Class/Conformity Resistance to penetration to liquid (EN ISO 6530 – EN 13034) Class 3: < 1% Class 2: < 5% Class 1: < 10% H 2 SO 4 30%: class 3 NaOH 10%: class 3 o-xilene: n.a. Butan-1-ol: n.a. Repellency to liquid (EN ISO 6530 – EN 13034) Class 3: > 95% Class 2: > 90% Class 1: > 80 H 2 SO 4 30%: class 3 NaOH 10%: class 3 o-xilene: n.a. Butan-1-ol: n.a. Abrasion Resistance (EN 530 - method 2) Class 2 > 100 cycles Class 2 Trapezoidal tear resistance (EN ISO 9073-4) Class 2 > 20 N Class 2 Tensile strength (EN ISO 13934-1) Class 1 > 60 N Class 2 Puncture resistance (EN 863 - EN 13034) Class 2 > 10 N Class 2 Flex cracking resistance (EN 7854) Class 6 > 100 000 c. Class 6 EN ISO 13688:2013 Test Requirement Result /Class/Conformity pH (EN 340 – ISO 3071) 3.5 > pH > 9.5 Pass Amines (EN 340 – ISO 3071) Pass Classification according to EN 14325

7. 7 www.chemsplash.com websales@chemsplash.com +44 (0) 1942 885060 Xtreme SMS 50 AS Coverall Type 5/6 Style Code: 2503 The Chemsplash Xtreme SMS 50 Anti-Static Coverall is made from a breathable SMS fabric which has been chemically treated to offer its user anti-static protection to EN 1149-5:2018 standards. It also meets CAT III Type 5 & 6. This coverall has an elasticated hood, ankles, a knitted cuff, and a two way zip with an adhesive flap to secure over the zip. Whilst being extremely comfortable to wear its strong and robust properties provide an excellent barrier against chemical splash and hazardous particles. Features ● 50GSM Breathable SMS Fabric ● Anti Static Protection ● Elasticated Hood ● Knitted Cuffs ● Elasticated Back & Ankles ● Two Way Zip ● Adhesive Zip Flap ● Silicone & Latex Free Suitable Applications Asbestos Related Work Handling Powders General Maintenance Construction Pharmaceutical Industries Wood & Metal Processing Touch-up Paint Spraying Fibreglass / Resin Applications Ceramic Fibre Colours Available White Blue Sizes in CMs in compliance with EN340 Size Height Chest S 160-165 89-93 M 163-168 93-98 L 167-172 101-106 XL 173-178 108-114 XXL 176-181 116-122 XXXL 185-190 124-130 EN13982-1 TYPE 5 EN13034 TYPE 6 EN1149-5:2018 Anti-static Blue Version Performance of whole suit Test Requirement Result /Class/Conformity Resistance to liquid penetration - Spray test type 6 (EN ISO 17491-4 met. A – EN 13034) Pass Resistance to aerosol penetration - Inward leakage type 5 (EN ISO 13982-2 – EN ISO 13982) IL 82/90 ≤ 30%, TILS 8/10 ≤ 15% Pass Practical performance tests (EN 1073-2) Class 1 Seams: strength (EN ISO 13935-2) > 75 N Class 3 Performance of fabric Test Requirement Result /Class/Conformity Resistance to penetration to liquid (EN ISO 6530 – EN 13034) Class 3: < 1% Class 2: < 5% Class 1: < 10% H 2 SO 4 30%: class 3 NaOH 10%: class 3 o-xilene: n.a. Butan-1-ol: n.a. Repellency to liquid (EN ISO 6530 – EN 13034) Class 3: > 95% Class 2: > 90% Class 1: > 80 H 2 SO 4 30%: class 3 NaOH 10%: class 3 o-xilene: n.a. Butan-1-ol: n.a. Abrasion Resistance (EN 530 - method 2) Class 2 > 100 cycles Class 2 Trapezoidal tear resistance (EN ISO 9073-4) Class 2 > 40 N Class 3 Tensile strength (EN ISO 13934-1) Class 1 > 60 N Class 1 Puncture resistance (EN 863 - EN 13034) Class 2 > 10 N Class 2 Flex cracking resistance (EN 7854) Class 6 > 100 000 c. Class 6 Electric surface resistance (ANSI/ESD STM 2.1:2013 – test condition EN 1 149-1) ≤ 2.5 x 10 9 Pass EN ISO 13688:2013 Test Requirement Result /Class/Conformity pH (EN 340 – ISO 3071) 3.5 > pH > 9.5 Pass Amines (EN 340 – ISO 3071) Pass Classification according to EN 14325 Available with No Chest Logo Style Code: 2650 Sterile Irradiated Version available on request STERILE IRRADIATED

8. 8 www.chemsplash.com websales@chemsplash.com +44 (0) 1942 885060 Xtreme SMS 50 FR Coverall Type 5/6 Style Code: 2513 The Chemsplash Xtreme SMS 50 Flame Retardant coverall is made from a breathable SMS fabric which has been chemically treated to offer limited flame retardant protection to EN14116 index 1 also meets CAT III Type 5 & 6. This suit has elasticated hood, wrists, ankles, and a two way zip, with an adhesive flap cover. Whilst being extremely comfortable to wear it’s strong and robust properties provide an excellent chemical barrier and it is suitable to be worn over a primary EN531 flame retardant cotton based coverall without compromising the flame resistant properties of the EN531 garment. NOTE: Disposable FR garments that meet EN 14116 or the predecessor standard, EN533:1997, should never be used as primary (sole) Flame Retardant protection. Features ● 50GSM Breathable SMS Fabric ● 3 Pce Elasticated Hood ● Elasticated Wrists, Back and Ankles ● Two Way Zip ● Adhesive Zip Flap ● Anti-Static ● Silicone & Latex Free ● Flame Retardant to EN14116 Index 1 ● Flame Retardancy Includes All Material Assemblies Suitable Applications Petrochemical Industries Industrial Cleaning Utilities General Maintenance Colours Available White Blue Sizes in CMs in compliance with EN340 Size Height Chest S 160-165 89-93 M 163-168 93-98 L 167-172 101-106 XL 173-178 108-114 XXL 176-181 116-122 XXXL 185-190 124-130 EN13982-1 TYPE 5 EN13034 TYPE 6 EN 1149-5:2018 Anti-static EN14116 Index 1 EN1073-2 NUCLEAR PARTICLE Class 2 Performance of whole suit Test Requirement Result /Class/Conformity Resistance to liquid penetration - Spray test Tipo 6 (EN ISO 17491-4 met. A – EN 13034) Pass Resistance to aerosol penetration - Inward leakage Tipo 5 (EN ISO 13982-2 – EN ISO 13982) IL 82/90 ≤ 30%, Ls 8/10 ≤ 15% Pass Nominal protection factor (EN ISO 13982-2 - EN ISO 13982) Class 2 Seams: strength (EN ISO 13935-2) > 125 N < 300 N Class 4 Performance of fabric Test Requirement Result /Class/Conformity Resistance to penetration to liquid (EN ISO 6530 – EN 13034) Class 3: < 1% Class 2: < 5% Class 1: < 10% H 2 SO 4 30%: class 3 NaOH 10%: class 3 Repellency to liquid (EN ISO 6530 – EN 13034) Class 3: > 95% Class 2: > 90% Class 1: > 80 H 2 SO 4 30%: class 3 NaOH 10%: class 3 Abrasion Resistance (EN 530 - method 2) > 10 cycles Class 1 Trapezoidal tear resistance (EN ISO 9073-4) > 20 N < 40 Class 2 Tensile strength (EN ISO 13934-1) > 100 N < 250 N Class 3 Puncture resistance (EN 863 - EN 1073-2 EN 13034) > 10 N Class 2 Flex cracking resistance (EN 7854) > 100 000 c. Class 6 Electric surface resistance (test condition EN 1149-1) ≤ 2.5 x 10 9 Pass Limited Flame Spread (EN ISO 15025 met. A - EN ISO 14116) Afterflame time: < 2s Afterglow time: <2s Flame spread: none Debris: none Hole: yes Pass Index 1 pH (EN 340 – ISO 3071) 3.5 > pH > 9.5 Pass Classification according to EN 14325 Sterile Irradiated Version available on request STERILE IRRADIATED

16. 16 www.chemsplash.com websales@chemsplash.com +44 (0) 1942 885060 Jet Spray 88 Coverall Type 3B/4B/5B/6B Style Code: 2727 The Chemsplash Jet Spray 88 Type 3B/4B/5B/6B Coverall is highly resistant against Chemical permeation. Made from a thick 88 GSM heavy weight Polypropylene / Polyethylene multilayer laminated material, it is also tested to provide protection against Biological Hazards to EN14126, protecting again Viruses, Bacteria and Blood borne pathogens and also protects against Particulate Radioactive contamination (level 2) to EN1073-2. Features ● 88GSM Heavyweight Microporous Non Woven Fabric ● Ultrasonically Tape Welded Seams ● Self Adhesive Chin Strap for Optimum Protection ● Elasticated Hood, Half Waist, Cuffs and Ankles ● Convenient Thumb Loops at Wrist ● Single-Way Zip with Bi-Folding Self Adhesive Flap ● Silicone & Latex Free ● Non Linting Fabric ● Anti-Static Suitable Applications Liquid Chemical Handling Contamination Control Medical Emergency Response Maintenance work at Nuclear Facilities Biological Protection Colours Available Yellow Sizes in CMs in compliance with EN340 Size Height Chest S 160-165 89-93 M 163-168 93-98 L 167-172 101-106 XL 173-178 108-114 XXL 176-181 116-122 XXXL 185-190 124-130 EN14605 TYPE 3B EN14605 TYPE 4B EN13982-1 TYPE 5B EN13034 TYPE 6B EN1149-5:2018 Anti-static EN1073-2 Nuclear Particles Class 1 EN14126 Infective Agents Performance of whole suit Test Requirement Result /Class/Conformity Jet test (type 3) EN ISO 17491-3 Pass Spray test (type 4) EN ISO 17491-4 – met. B Pass Aerosol penetration (type 5) IL 82/90 ≤ 30%, TILS 8/10 ≤ 15% Pass Seams tensile strength (EN ISO 13935-2) - 4017 Class 4 > 75 N 4 Seams tensile strength (EN ISO 13935-2) - 4018 Class 4 > 75 N 4 Nominal protection factor (EN ISO 13982-EN 1073-20) Class 1 pH 6.3 Pass Performance of fabric Test Requirement Result /Class/Conformity Resistance to penetration to liquid (EN ISO 6530 – EN 13034) Class 3: < 1% Class 2: < 5% Class 1: < 10% H 2 SO 4 30%: class 3 NaOH 10%: class 3 o-xilene: class 3 Butan-1-ol: class 3 Repellency to liquid (EN ISO 6530 – EN 13034) Class 3: > 95% Class 2: > 90% Class 1: > 80 H 2 SO 4 30%: class 3 NaOH 10%: class 3 o-xilene: class 3 Butan-1-ol: class 3 Abrasion Resistance (EN 530 - method 2) Class 6: > 2000 cycles Class 6 Trapezoidal tear resistance (EN ISO 9073-4) Class 2 > 10 N Class 2 Tensile strength (EN ISO 13934-1) Class 2 > 60 N Class 2 Puncture resistance (EN 863) Class 2: > 10 N Class 2 Flex cracking resistance (EN 7854) Class 6: > 100 000 c. Class 6 Electric surface resistance (ANSI/ESD STM 2.1:2013 – test condition EN 1 149-1) < 1,3 x10 8 Ω Pass EN 14126:2003 Test Requirement Result /Class/Conformity Resistance to penetration by blood-borne pathogens - phi-x174 bacteriophage test - ISO 16603/16604 Class 6: 20 kPa Class 6 Resistance to penetration by infective agents due to mechanical contact with substances containing contaminated liquids - ISO 22610 (test microorganism: staphylococcus aureus) Class 6: t > 75 Class 6 Resistance to penetration by contaminated liquid aerosols - ISO DIS 2261 1 (test microorganism: staphylococcus aureus) Class 3: log > 5 Class 3 Resistance to penetration by contaminated solid particles - EN ISO 22612 (test microorganism: spores of Bacillus subtilis) Class 3: ≤ 1 Class 3 EN ISO 13688:2013 Test Requirement Result /Class/Conformity pH (EN 340 – ISO 3071) 3.5 > pH > 9.5 Pass Classification according to EN 14325 Sterile Irradiated Version available on request STERILE IRRADIATED Available with Feet Attached , Style Code 2617

19. 19 www.chemsplash.com websales@chemsplash.com +44 (0) 1942 885060 TELL US WHAT YOU WANT! We can Design, Manufacture & Certify* for you. *Certification where possible depending on regulation and design requirement. 3. Jet Spray Apron Type PB (3-B) Style Code: 2730 ● 88GSM Chemsplash Jet Spray Fabric ● Low-Linting ● Anti-Static Material ● 110x67mm 1. Jet Spray Cape Hood Type PB (3-B) Style Code: 2700 ● 88GSM Chemsplash Jet Spray Fabric ● Cat III Partial Body Protection ● Anti-Static Material ● Elasticated Facial Area ● Cape Style Fit ● Low-Linting 2. Jet Spray PVC Sole Overboot Type PB (3-B) Style Code: 2739 ● 88GSM Chemsplash Jet Spray Fabric ● Clear PVC Sole ● Low Linting ● Elasticated Top And Ankles 4. Jetspray Oversleeve Type PB (3-B) Style Code: 2701 ● 88GSM Chemsplash Jet Spray Fabric █ ● Type PB (3-B) Partial Body Protection ● With Thumb Loops ● Low Linting ● Elasticated at Both Ends ● 42cm (16.5") Long ● Taped Seams 5 Jet Spray Surgeons Gown PB (3-B)(6-B) Style Code: 6248 ● 88 GSM Chemsplash Jet Spray Fabric ● High Hazard Protection ● Ankle Length ● Tie Back ● Elasticated Cuffs ● Anti-Static ● Non-Linting EN13034 TYPE 6 CAT III Partial Body Protection EN1149-5:2018 ANTI-STATIC EN14126:2003 INFECTIVE AGENTS EN14325:2018 Jet Spray Type PB(3-B)(4-B) (6-B) EN14605 TYPE 3B EN14605 TYPE 4B

17. 17 www.chemsplash.com websales@chemsplash.com +44 (0) 1942 885060 2. PU Grip Slip-Resistant Overshoe Type PB(6-B) Style Code: 2782 ● Chemsplash 55GSM Type 5B&6B PB Material ● 70gsm Grey PU Anti-Slip Sole ● Elasticated Top And Ankles ● Silicone & Latex Free ● Anti-Static Material ● Non-Linting 1. Overshoes Type PB (6-B) Style Code: 2560 ● Chemsplash 55GSM Type 5B&6B PB Material ● 16" In Length ● Silicone & Latex Free ● Non-Linting ● Anti-Static Material 4. PU Grip Slip-Resistant Overboot Type PB(6-B) Style Code: 2781 ● Chemsplash 55GSM Type 5B&6B PB Material ● 70GSM Grey PU Anti-Slip Sole ● Elasticated Top ● Silicone & Latex Free ● Anti-Static Material ● Non-Linting 3. PVC Grip Slip-Resistant Overshoe Type PB(6-B) Style Code: 2564 ● Chemsplash 55GSM Type 5B&6B PB Material ● Coated White PVC Slip-Resistant Sole ● Silicone & Latex Free ● Anti-Static Material ● Non-Linting ● 16" In Length 5. PVC Grip Slip-Resistant Overboot Type PB (6-B) Style Code: 2565 ● Chemsplash 55GSM Type 5B&6B PB Material ● Elasticated Top And Ankles ● Silicone & Latex Free ● Anti-Static Material ● Non-Linting ● White PVC Sole Sterile Irradiated Version Code: 5820 Type PB(3-B)(4-B) (6-B) Our Chemsplash coveralls are complimented by our extensive range of accessories which can be used in conjunction with our coveralls or alone in isolation should the situation permit. All accessories are made from our lint free, comfortable Chemsplash Type 3B/4B 5B/6B PB fabrics. The Chemsplash Accessory range has been carefully designed and selected to offer the wearer maximum comfort whilst also offering the peace of mind protection you can rely on. Suitable Applications Abattoirs Asbestos Handling Automotive Industry Clean Room Farming Food Process Industry Forensic Science Maintenance and Repairs Painting Pharmaceutical Police – Scene of Crime Roof Insulation Technology Industry 2-Pack Paint Spray Waste Management Services EN13982-1 TYPE 5 EN13034 TYPE 6 CAT III Partial Body Protection EN1149-5:2018 ANTI-STATIC EN14126:2003 INFECTIVE AGENTS EN14325:2018 Sterile Irradiated Version available on request STERILE IRRADIATED STERILE IRRADIATED

11. 11 www.chemsplash.com websales@chemsplash.com +44 (0) 1942 885060 Cool 67 Coverall Type 5/6 Style Code: 2510 The Chemsplash Cool 67 Coverall is made from white 67gsm microporous laminated fabric and a blue 50gsm SMS Breathable Back Panel. This result is a Cat III Type 5 & 6 suit which offers the best combination of a high chemical splash and a hazardous particle barrier with much improved breathability and comfort. This suit includes a 3 piece hood, knitted cuffs, elasticated ankles, a two way zip, and an adhesive cover flap. Chemsplash Cool 67 fabric is Anti-static to EN1149-5:2018 and non- linting, therefore ideal for use in wide ranging applications where the operating environment must not be contaminated with garment fibres. Features ● 67GSM Microporous Laminate Fabric ● 50GSM Breathable SMS Back Panel ● Three Piece Hood ● L o w L i n t i n g K n i t t e d C u ff s ● Elasticated Ankles ● Two Way Zip ● Adhesive Zip Flap ● Latex and Silicone Free ● Non Linting Fabric ● Anti-Static Suitable Applications Automotive Paint Spraying Fibreglass Product Manufacturing General Paint Spraying Pharmaceutical Product Manufacturing Colours Available ▌ White with Blue Back Sizes in CMs in compliance with EN340 Size Height Chest S 162-167 82-92 M 167-172 92-102 L 172-177 102-112 XL 177-182 112-122 XXL 183-188 122-132 XXXL 188-193 132-142 EN13982-1 TYPE 5 EN13034 TYPE 6 EN 1149-5:2018 Anti-static Breathable Back Panel EN1073-2 NUCLEAR PARTICLE Class 1 Performance of whole suit Test Requirement Result /Class/Conformity Resistance to liquid penetration - Spray test type 6 (EN ISO 17 491-4 met. A – EN 13034) Pass Resistance to aerosol penetration - Inward leakage type 5 (EN I SO 13982-2 – EN ISO 13982) IL 82/90 ≤ 30%, TILS 8/10 ≤ 15% Pass Nominal protection factor (EN ISO 13982-2 – EN 1073-2) TIL E % 30, TIL A % 20, Fpn 5 Class 1 Seams: strength (EN ISO 13935-2) > 75 N Class 3 Performance of fabric Test Requirement Result /Class/Conformity Resistance to penetration to liquid (EN ISO 6530 – EN 13034) Class 3: < 1% Class 2: < 5% Class 1: < 10% H 2 SO 4 30%: class 3 NaOH 10%: class 3 o-xilene: n.c. Butan-1-ol: n.c. Repellency to liquid (EN ISO 6530 – EN 13034) Class 3: > 95% Class 2: > 90% Class 1: > 80 H 2 SO 4 30%: class 3 NaOH 10%: class 3 o-xilene: n.c. Butan-1-ol: n.c. Abrasion Resistance (EN 530 - method 2) Class 3 > 500 cycles, Class 2 > 100 cycles Class 3 (MP), Class 2 (SMS) Trapezoidal tear resistance (EN ISO 9073-4) Class 2 > 20 N Class 2 (MP), Class 2 (SMS) Tensile strength (EN ISO 13934-1) Class 1 > 30 N, Class 2 > 60 N Class 1 (MP), Class 2 (SMS) Puncture resistance (EN 863 - EN 13034) Class 2 > 10 N Class 2 (MP), Class 2 (SMS) Flex cracking resistance (EN 7854) Class 6 > 100 000 c. Class 6 (MP), Class 6 (SMS) Ignition and flammability (EN 13274-4 - EN 1073-2 ) Pass Electric surface resistance (ANSI/ESD STM 2.1:2013 – test condi tion EN 1149-1) ≤ 2.5 x 10 9 Pass EN ISO 13688:2013 Test Requirement Result /Class/Conformity pH (EN 340 – ISO 3071) 3.5 > pH > 9.5 Pass Animes (EN340 - ISO 3071) Pass Classification according to EN 14325 Sterile Irradiated Version available on request STERILE IRRADIATED

12. 12 www.chemsplash.com websales@chemsplash.com +44 (0) 1942 885060 Pro 63 Coverall Type 5B/6B Style Code: 2518 The Chemsplash Pro Coverall is made from a strong yet breathable 63gsm microporous laminated fabric. It is a high quality and robust Cat III Type 5 & 6 suit which meets the most stringent requirements for a variety of industries. Chemsplash Pro fabric is Non-Linting and anti-static to EN 1149-5 2018, therefore ideal for use in wide ranging applications where the operating environment must not be contaminated with garment fibres. For comfort and ease of fit, a knitted cuff and two way zip has been added, and the zip also has an adhesive cover flap for extra sealing. This is our premium Cat III Type 5 & 6 coverall Features ● 63GSM Thermal Weld Microporous Laminate Fabric ● Conforms to ENISO14644-1* Class 5 ● Elasticated 3 Pce Hood ● L o w - L i n t i n g K n i t t e d C u ff s ● Two Way Zip ● Adhesive Zip Flap ● Internal Hang Loop ● Silicone & Latex Free ● Non Linting Fabric ● Anti-Static Suitable Applications Pharmaceutical Industries Agriculture Cleanrooms Medical General Paint Spraying Crime Scene Investigation Veterinary Services Colours Available White Sizes in CMs in compliance with EN340 Size Height Chest S 160-165 89-93 M 163-168 93-98 L 167-172 101-106 XL 173-178 108-114 XXL 176-181 116-122 XXXL 185-190 124-130 EN13982-1 TYPE 5B EN13034 TYPE 6B EN 1149-5:2018 Anti-static EN1073-2 NUCLEAR PARTICLE Class 1 EN14126 Infective Agents Version available: WITH COLLAR - NO HOOD Style Code: 2519 Sterile Irradiated Version: Code: 2783 ENISO 14644-1 Class 5, refers to the number of particles per cu bic meter in a cleanroom or cabinet and the linting test (ISO9073-10) refers to the number of particles released from th e fabric in test conditions. The requirement(EN13795) for the compliance of fabric linting i s < 3.5 and cleanliness-particulate matter <4 Performance of whole suit Test Requirement Result /Class/Conformity Resistance to liquid penetration - Spray test type 6 (EN ISO 17 491-4 met. A – EN 13034) Pass Resistance to aerosol penetration - Inward leakage type 5 (EN I SO 13982-2 – EN ISO 13982) IL 82/90 ≤ 30%, TILS 8/10 ≤ 15% Pass Nominal protection factor (EN ISO 13982-2 – EN 1073-2) TIL E % 30, TIL A % 20, Fpn 5 Class 1 Seams: strength (EN ISO 13935-2) Class 3: > 75 N Class 3 Performance of fabric Test Requirement Result /Class/Conformity Resistance to penetration to liquid (EN ISO 6530 – EN 13034) Class 3: < 1% Class 2: < 5% Class 1: < 10% H 2 SO 4 30%: class 3 NaOH 10%: class 3 o-xilene: class 3 Butan-1-ol: class 3 Repellency to liquid (EN ISO 6530 – EN 13034) Class 3: > 95% Class 2: > 90% Class 1: > 80 H 2 SO 4 30%: class 3 NaOH 10%: class 3 o-xilene: class 2 Butan-1-ol: class 3 Abrasion Resistance (EN 530 - method 2) Class 1: > 10 cycles Class 1 Trapezoidal tear resistance (EN ISO 9073-4) Class 2: > 20 N Class 2 Tensile strength (EN ISO 13934-1) Class 2: > 60 N Class 1 Puncture resistance (EN 863 - EN 13034) Class 2: > 10 N Class 2 Flex cracking resistance (EN 7854) Class 3: > 5 000 c. Class 6 Ignition and flammability (EN 13274-4 - EN 1073-2 ) Pass Electric surface resistance (ANSI/ESD STM 2.1:2013 – test condi tion EN 1149-1) ≤ 2.5 x 10 9 Pass EN 14126:2003 Test Requirement Result /Class/Conformity Bursting strength (13938-1) Class 3: >160 kPa Class 3 Resistance to penetration by blood-borne pathogens - phi-x174 b acteriophage test - ISO 16603/16604 Class 1: 0 kPa Class 1 Resistance to penetration by infective agents due to mechanical contact with substances containing contaminated liquids - ISO 22610 (test microorganism: staphylococcus aureus) Class 6: t > 75 Class 6 Resistance to penetration by contaminated liquid aerosols - ISO DIS 22611 (test microorganism: staphylococcus aureus) Class 1: 1 < log ≤ 3 Class 1 Resistance to penetration by contaminated solid particles - EN ISO 22612 (test microorganism: spores of Bacillus subtilis) Class 3: ≤ 1 Class 3 EN ISO 13688:2013 Test Requirement Result /Class/Conformity pH (EN 340 – ISO 3071) 3.5 > pH > 9.5 Pass Classification according to EN 14325 STERILE IRRADIATED

18. 18 www.chemsplash.com websales@chemsplash.com +44 (0) 1942 885060 10. Zip Fasten Lab coat Type PB(6-B) Style Code: 2549 ● Chemsplash 55GSM Type 5B&6B PB Fabric ● Zip Fasten Front with Adhesive Flap Cover ● Elasticated Cuffs ● Fold Over Collar ● Silicone & Latex Free ● Anti-Static Material ● Non-Linting 11. with Knitted Cuffs Style Code: 2649 ● Low-Linting Cuff ● Non-Linting Fabric 9. Cape Hood Type PB (6-B) Style Code: 2558 ● Chemsplash Type 5B&6B PB Fabric ● Elasticated Facial Area ● Cape Style Fit ● Silicone & Latex Free ● Anti-Static Material ● Non-Linting Sterile Irradiated Version Code: 5775 8. Oversleeve Knitted Cuff & Thumb Loop Style Code: 2593 ● Chemsplash Type 5B & 6B Fabric ● Non-Linting Fabric ● Low-Linting Knitted Cuff with Thumb Loop ● Silicone & Latex Free ● Anti-Static ● 42cm in Length 7. Knitted Cuff Oversleeves Type PB (6-B) Style Code: 2557 ● Chemsplash 55GSM Type 5B&6B PB Fabric ● Microporous, Soft and Comfortable Feel ● Low-Lint Knitted Cuff ● Anti-Static Material ● Silicone & Latex Free ● Non-Linting ● 49.5cm in Full Length (Including the Cuff) Sterile Irradiated Version Code: 5771 6. Elasticated Oversleeves Type PB (6-B) Style Code: 2552 ● Chemsplash 55GSM Type 5B&6B Fabric ● Microporous Fabric ● Elasticated At Both Ends ● Anti-Static Material ● Silicone & Latex Free ● Non-Linting ● 42cm In Length EN13982-1 TYPE 5 EN13034 TYPE 6 CAT III Partial Body Protection EN1149-5:2018 ANTI-STATIC EN14126:2003 INFECTIVE AGENTS EN14325:2018 Sterile Irradiated Version Code: 6758 STERILE IRRADIATED STERILE IRRADIATED STERILE IRRADIATED 12. Bib Apron Style Code: 2551 ● Tyvek Type 5B&6B PB Fabric ● Knee Length ● Tie Tapes ● 83cm (32.7") Length

10. 10 www.chemsplash.com websales@chemsplash.com +44 (0) 1942 885060 Delta 67 Coverall Type 5B/6B Style Code: 2792 The Chemsplash Delta 67 Coverall is made from our soft comfortable 67gsm microporous laminate fabric, meeting Cat III Type 5B & 6B. Whilst also being compliant to EN1149-5:2018 (Antistatic) and EN1073-2 (Nuclear Particle). Chemsplash Delta 67 is suitable for a vast number of applications, though it is especially useful for instances of prolonged wear. Offering improved breathability whilst still maintaining an effective hazard barrier. Features ● 67GSM Microporous Laminate Fabric ● Elasticated Three Piece Hood ● Low-Linting Knitted Cuffs With Thumb Loops ● Two Way Zip with Adhesive Zip Flap ● Elasticated Back & Ankles ● Reinforced Bound Seam at Crotch Area ● Non Linting & Anti-Static Fabric ● Silicone & Latex Free ● Available in sizes 4-6XL (white) codes 2756,57&58 ● Available in Orange or Navy Under code 2776 Suitable Applications Pharmaceutical Industries Agriculture Cleanrooms Medical General Paint Spraying Crime Scene Investigation Veterinary Services Colours Available White Orange - Use Style Code: 2776 Blue - Use Style Code: 2776 Sizes in CMs in compliance with EN340 Size Height Chest S 160-165 89-93 M 163-168 93-98 L 167-172 101-106 XL 173-178 108-114 XXL 176-181 116-122 XXXL 185-190 124-130 Version available: ORANGE Style code: 2776 Version available: BLUE Style code: 2776 Sterile Irradiated Version: Code: 2766 Performance of whole suit Test Requirement Result /Class/Conformity Resistance to liquid penetration - Spray test type 6 (EN ISO 17 491-4 met. A – EN 13034) Pass Resistance to aerosol penetration - Inward leakage type 5 (EN I SO 13982-2 – EN ISO 13982) IL 82/90 ≤ 30%, TILS 8/10 ≤ 15% Pass Nominal protection factor (EN ISO 13982-2 – EN 1073-2) TIL E % 3, TIL A % 2, Fpn 50 Class 2 Seams: strength (EN ISO 13935-2) > 75 N Class 3 Performance of fabric Test Requirement Result /Class/Conformity Resistance to penetration to liquid (EN ISO 6530 – EN 13034) Class 3: < 1% Class 2: < 5% Class 1: < 10% H 2 SO 4 30%: class 3 NaOH 10%: class 3 o-xilene: class 3 Butan-1-ol: class 3 Repellency to liquid (EN ISO 6530 – EN 13034) Class 3: > 95% Class 2: > 90% Class 1: > 80 H 2 SO 4 30%: class 3 NaOH 10%: class 3 o-xilene: class 2 Butan-1-ol: class 3 Abrasion Resistance (EN 530 - method 2) Class 3 > 500 cycles Class 2 Trapezoidal tear resistance (EN ISO 9073-4) Class 2 > 20 N Class 2 Tensile strength (EN ISO 13934-1) Class 1 > 30 N Class 1 Puncture resistance (EN 863 - EN 13034) Class 2 > 10 N Class 2 Flex cracking resistance (EN 7854) Class 6 > 100 000 c. Class 6 Electric surface resistance (ANSI/ESD STM 2.1:2013 – test condi tion EN 1149-1) ≤ 2.5 x 10 9 Pass EN 14126:2003 Test Requirement Result /Class/Conformity Bursting strength (13938-1) Class 3: >160 kPa Class 3 Resistance to penetration by blood-borne pathogens - phi-x174 b acteriophage test - ISO 16603/16604 Class 4: 7 kPa Class 4 Resistance to penetration by infective agents due to mechanical contact with substances containing contaminated liquids - ISO 22610 (test microorganism: staphyloc occus aureus) Class 6: t > 75 Class 6 Resistance to penetration by contaminated liquid aerosols - ISO DIS 22611 (test microorganism: staphylococcus aureus) Class 3: log > 5 Class 3 Resistance to penetration by contaminated solid particles - EN ISO 22612 (test microorganism: spores of Bacillus subtilis) Class 3: ≤ 1 Class 3 EN ISO 13688:2013 Test Requirement Result /Class/Conformity pH (EN 340 – ISO 3071) 3.5 > pH > 9.5 Pass Amines (EN 340 – ISO 3071) Pass (Blue / Orange) Classification according to EN 14325 EN13982-1 TYPE 5B EN13034 TYPE 6B EN 1149-5:2018 Anti-static EN1073-2 NUCLEAR PARTICLE Class 2 EN14126 Infective Agents STERILE IRRADIATED

14. 14 www.chemsplash.com websales@chemsplash.com +44 (0) 1942 885060 AV MAX Type 4B/5B/6B Style Code: 2648 The Chemsplash AV MAX is made from a 67GSM microporous laminated Cat III Type 4B, 5B & 6B fabric. It achieves a top class result of 6 from a possible 6, for resistance to blood borne pathogen testing under ISO16603/16604. All seams are taped offering a stronger more effective barrier to liquids and particulate. Chemplash AV MAX fabric is both anti-static to EN1149-5: 2018 and is resistant to infectious agents to EN14126, complying with the highest resistance to viral and bacterial infection. This suit is an ideal choice for pharmaceutical, cleanroom, semi-conductor manufacturing and infection contamination control. Features ● 67GSM Microporous Laminate Fabric ● Fully Taped Seams ● Three Piece Hood ● Elasticated Cuffs with Thumb Loops ● Elasticated Hood, Back & Ankles ● Two Way Zip with Zip Flap ● Silicone & Latex Free ● Low Linting ● Anti Static ● Scores Top Mark of 6 for ISO 16603/16604 Suitable Applications Agriculture General Paint Spraying Pharmaceutical Industries Medical Fibreglass Product Manufacturing Boat & Ship Building Mining Emergency Response Colours Available | White with Red Taped Seams Sizes in CMs in compliance with EN340 Size Height Chest S 160-165 89-93 M 163-168 93-98 L 167-172 101-106 XL 173-178 108-114 XXL 176-181 116-122 XXXL 185-190 124-130 EN14605 TYPE 4B EN13982-1 TYPE 5B EN13034 TYPE 6B EN1073-2 NUCLEAR PARTICLE Class 3 EN 1149-5:2018 Anti-static EN14126 Infective Agents OUR NEW STYLE SUIT WHICH SCORES TOP RESULTS ON EN 14126 TESTS! Performance of whole suit Test Requirement Result /Class/Conformity Resistance to liquid penetration - Spray test Tipo 4 (EN ISO 17491-4 met. A – EN 14605) Pass Resistance to liquid penetration - Spray test Tipo 6 (EN ISO 17491-4 met. A – EN 13034) Pass Resistance to aerosol penetration - Inward leakage Tipo 5 (EN ISO 13982-2 – EN ISO 13982) IL 82/90 ≤ 30%, TILS 8/10 ≤ 15% Pass Nominal protection factor (EN ISO 13982-2 – EN 1073-2) TIL E % 3, TIL A % 2, Fpn 50 Class 2 Seams: permeation by liquids (EN ISO 6529 - EN14605) Class 1: > 10 min H 2 SO 4 30% : Class 1 Seams: strength (EN ISO 13935-2) Class 4: > 125 N Class 4 Performance of fabric Test Requirement Result /Class/Conformity Resistance to penetration to liquid (EN ISO 6530 – EN 13034) Class 3: < 1% Class 2: < 5% Class 1: < 10% H 2 SO 4 30%: class 3 NaOH 10%: class 3 o-xilene: class 3 Butan-1-ol: class 3 Repellency to liquid (EN ISO 6530 – EN 13034) Class 3: > 95% Class 2: > 90% Class 1: > 80 H 2 SO 4 30%: class 3 NaOH 10%: class 3 o-xilene: class 2 Butan-1-ol: class 3 Abrasion Resistance (EN 530 - method 2) Class 3: > 500 cycles Class 3 Trapezoidal tear resistance (EN ISO 9073-4) Class 2: > 20 N Class 2 Tensile strength (EN ISO 13934-1) Class 1: > 30 N Class 1 Puncture resistance (EN 863 - EN 13034) Class 2: > 10 N Class 2 Flex cracking resistance (EN 7854) Class 6: > 100 000 c. Class 6 Permeation by liquids (EN ISO 6529 - EN 14605) Class 1: > 10 min H 2 SO 4 30% : Class 1 Electric surface resistance (ANSI/ESD STM 2.1:2013 – test condi tion EN 1149-1) ≤ 2.5 x 10 9 Pass EN 14126:2003 Test Requirement Result /Class/Conformity Resistance to penetration by blood-borne pathogens - phi-x174 b acteriophage test - ISO 16603/16604 Class 6: 20 kPa Class 6 Resistance to penetration by Agentes Infecciosos due to mechanical contact with substances containing contaminated liquids - ISO 22610 (test microorganism: staphyloc occus aureus) Class 6: t > 75 Class 6 Resistance to penetration by contaminated liquid aerosols - ISO DIS 22611 (test microorganism: staphylococcus aureus) Class 3: log > 5 Class 3 Resistance to penetration by contaminated solid particles - EN ISO 22612 (test microorganism: spores of Bacillus subtilis) Class 3: ≤ 1 Class 3 EN ISO 13688:2013 Test Requirement Result /Class/Conformity pH (EN 340 – ISO 3071) 3.5 > pH > 9.5 Pass Classification according to EN 14325

25. 25 www.chemsplash.com websales@chemsplash.com +44 (0) 1942 885060 8. Double Stitched Mop Cap Style Code: 2516 ● 10GSM Non Woven Polypropylene ● Double Stitched ● Elasticated 8.1 Metal Detectable Version - Code: 3489 (Blue only) Colours Available: Blue █ White █ Red █ Yellow █ Green █ 13. 8.2 GSM Deluxe Over Shoes Compressed Polyethylene Style Code: 2573 ● Heavy Duty Compressed Polyethylene Sole ● 30 Gsm Polypropylene Embossed Grip on Sole ● Elasticated Polyproplyene Ankle Section ● 16" Long 10. Disposable Non Woven Beard Mask Style Code: 2505 ● Non-Woven Beard Mask ● Elasticated Colours Available: Blue █ White █ Red █ Green █ 12. 4.2 GSM Over Shoe Compressed Polyethylene Style Code: 2578 (Blue only) ● Disposable Compressed Polyethlene ● 16" Long ● Elasticated Ankles 12.1 3 GSM Version - Code: 2522 - (Available in: Blue, White, Red) 11. Polyethylene Disposable Oversleeves Style Code: 2527 ● 2.8GSM 20 Micron Oversleeve ● Elasticated At Both Ends Colours Available: Blue █ White █ Red █ Yellow █ Green █ 11.1 50 GSM Polypropylene Vrsn 42cm - (White Only) - Code: 2553 Minimal Risk Accessories Category I Polypropylene & CPE 9. Snood Cap Style Code: 2528 ● Heavyweight Polypropylene Colours Available: Blue █ White █

9. 9 www.chemsplash.com websales@chemsplash.com +44 (0) 1942 885060 Eka 55 Coverall Type 5B/6B Style Code: 2511 The Chemsplash Eka 55 Coverall is made from 55GSM microporous laminated fabric. It offers users a better value laminated Cat III Type 5/6 coverall for those applications where the suit isn’t used for prolonged periods but where a high level of protection to liquid chemical splashes is still required. This suit has an elasticated back, hood, cuffs & ankles, and an adhesive cover flap for additional sealing. Chemsplash Eka 55 fabric is Anti-Static to EN1149-5:2018 and non- linting, therefore ideal for use in wide ranging applications where the operating environment must not be contaminated with garment fibres. Features ● 55GSM Microporous Laminate Fabric ● Elasticated 3 piece Hood & Back ● Elasticated Cuffs ● Two Way Zip ● Adhesive Zip Flap ● Elasticated Ankles ● Silicone & Latex Free ● Non Linting Fabric ● Anti-Static Suitable Applications Pharmaceutical Industries Agriculture Cleanrooms Medical General Paint Spraying Crime Scene Investigation Veterinary Services Colours Available White Sizes in CMs in compliance with EN340 Size Height Chest S 160-165 89-93 M 163-168 93-98 L 167-172 101-106 XL 173-178 108-114 XXL 176-181 116-122 XXXL 185-190 124-130 4XL 194-199 131-139 5XL 203-208 143-146 6XL 211-216 147-155 Sterile Irradiated Version: Code: 2765 EN13982-1 TYPE 5B EN13034 TYPE 6B EN 1149-5:2018 Anti-static EN14126 Infective Agents EN1073-2 NUCLEAR PARTICLE Class 1 Version available: ORANGE Style code: 2636 Version available: BLUE Style code: 2636 Available with Feet Attached , Style Code 2626 Performance of whole suit Test Requirement Result /Class/Conformity Resistance to liquid penetration - Spray test Tipo 6 (EN ISO 17491-4 met. A – EN 13034) Pass Resistance to aerosol penetration - Inward leakage Tipo 5 (EN ISO 13982-2 – EN ISO 13982) IL 82/90 ≤ 30%, TILS 8/10 ≤ 15% Pass Nominal protection factor (EN ISO 13982-2 – EN 1073-2) TIL E % 30, TIL A % 20, Fpn 5 Class 1 Seams: strength (EN ISO 13935-2) > 75 N Class 3 Performance of fabric Test Requirement Result /Class/Conformity Resistance to penetration to liquid (EN ISO 6530 – EN 13034) Class 3: < 1% Class 2: < 5% Class 1: < 10% H 2 SO 4 30%: class 3 NaOH 10%: class 3 o-xilene: class 3 Butan-1-ol: class 3 Repellency to liquid (EN ISO 6530 – EN 13034) Class 3: > 95% Class 2: > 90% Class 1: > 80 H 2 SO 4 30%: class 3 NaOH 10%: class 3 o-xilene: class 2 Butan-1-ol: class 3 Abrasion Resistance (EN 530 - method 2) Class 2 > 100 cycles Class 2 Trapezoidal tear resistance (EN ISO 9073-4) Class 2 > 20 N Class 2 Tensile strength (EN ISO 13934-1) Class 1 > 30 N Class 1 Puncture resistance (EN 863 - EN 13034) Class 2 > 10 N Class 2 Flex cracking resistance (EN 7854) Class 6 > 100 000 c. Class 6 Electric surface resistance (ANSI/ESD STM 2.1:2013 – test condition EN 1 149-1) ≤ 2.5 x 10 9 Pass EN 14126:2003 Test Requirement Result /Class/Conformity Bursting strength (13938-1) Class 3: >160 kPa Class 3 Resistance to penetration by blood-borne pathogens - phi-x174 bacteriophage test - ISO 16603/16604 Class 4: 7 kPa Class 4 Resistance to penetration by Agentes Infecciosos due to mechanical contact with substances containing contaminated liquids - ISO 22610 (test microorganism: staphylococcus aureus) Class 1: ≤ 15 min Class 1 Resistance to penetration by contaminated liquid aerosols - ISO DIS 2261 1 (test microorganism: staphylococcus aureus) Class 3: log > 5 Class 3 Resistance to penetration by contaminated solid particles - EN ISO 22612 (test microorganism: spores of Bacillus subtilis) Class 3: ≤ 1 Class 3 EN ISO 13688:2013 Test Requirement Result /Class/Conformity pH (EN 340 – ISO 3071) 3.5 > pH > 9.5 Pass Classification according to EN 14325 STERILE IRRADIATED 4XL Code: 2758 5XL Code: 2757 6XL Code: 2756

13. 13 www.chemsplash.com websales@chemsplash.com +44 (0) 1942 885060 Pro +4 Coverall Type 4B/5B/6B Style Code: 2597 The Chemsplash Pro +4 is made from a 67gsm microporous laminated Cat III Type 4B, 5B & 6B fabric. All seams are taped offering a stronger more effective barrier to liquids and particulate. Chemplash Pro +4 fabric is both anti-static to EN1149-5: 2018 and is resistant to infectious agents to EN14126, complying with the highest resistance to viral and bacterial infection. This suit is an ideal choice for pharmaceutical, cleanroom, semi-conductor manufacturing and infection contamination control. Features ● 67GSM Microporous Laminate Fabric ● Fully Taped Seams ● Three Piece Hood ● Elasticated Cuffs with Thumb Loops ● Elasticated Hood, Back & Ankles ● Two Way Zip with Zip Flap ● Silicone & Latex Free ● Low Linting ● Anti Static Suitable Applications Agriculture General Paint Spraying Pharmaceutical Industries Medical Fibreglass Product Manufacturing Boat & Ship Building Mining Emergency Response Colours Available | White with Orange Taped Seams | Blue Taped Seams also available for Special Order Sizes in CMs in compliance with EN340 Size Height Chest S 160-165 89-93 M 163-168 93-98 L 167-172 101-106 XL 173-178 108-114 XXL 176-181 116-122 XXXL 185-190 124-130 EN14605 TYPE 4B EN13982-1 TYPE 5B EN13034 TYPE 6B EN1073-2 NUCLEAR PARTICLE Class 2 EN 1149-5:2018 Anti-static EN14126 Infective Agents Sterile Irradiated Version: Code: 2767 Performance of whole suit Test Requirement Result /Class/Conformity Resistance to liquid penetration - Spray test type 4 (EN ISO 17 491-4 met. A – EN 14605) Pass Resistance to liquid penetration - Spray test type 6 (EN ISO 17 491-4 met. A – EN 13034) Pass Resistance to aerosol penetration - Inward leakage type 5 (EN I SO 13982-2 – EN ISO 13982) IL 82/90 ≤ 30%, TILS 8/10 ≤ 15% Pass Nominal protection factor (EN ISO 13982-2 – EN 1073-2) TIL E % 3, TIL A % 2, Fpn 50 Class 2 Seams: permeation by liquids (EN ISO 6529 - EN14605) Class 1: > 10 min H 2 SO 4 30% : Class 1 Seams: strength (EN ISO 13935-2) Class 4: > 125 N Class 4 Performance of fabric Test Requirement Result /Class/Conformity Resistance to penetration to liquid (EN ISO 6530 – EN 13034) Class 3: < 1% Class 2: < 5% Class 1: < 10% H 2 SO 4 30%: class 3 NaOH 10%: class 3 o-xilene: class 3 Butan-1-ol: class 3 Repellency to liquid (EN ISO 6530 – EN 13034) Class 3: > 95% Class 2: > 90% Class 1: > 80 H 2 SO 4 30%: class 3 NaOH 10%: class 3 o-xilene: class 2 Butan-1-ol: class 3 Abrasion Resistance (EN 530 - method 2) Class 3: > 500 cycles Class 3 Trapezoidal tear resistance (EN ISO 9073-4) Class 2: > 20 N Class 2 Tensile strength (EN ISO 13934-1) Class 1: > 30 N Class 1 Puncture resistance (EN 863 - EN 13034) Class 2: > 10 N Class 2 Flex cracking resistance (EN 7854) Class 6: > 100 000 c. Class 6 Permeation by liquids (EN ISO 6529 - EN 14605) Class 1: > 10 min H 2 SO 4 30% : Class 1 Ignition and flammability (EN 13274-4 - EN 1073-2 ) Pass Electric surface resistance (ANSI/ESD STM 2.1:2013 – test condi tion EN 1149-1) ≤ 2.5 x 10 9 Pass EN 14126:2003 Test Requirement Result /Class/Conformity Resistance to penetration by blood-borne pathogens - phi-x174 b acteriophage test - ISO 16603/16604 Class 4: 7 kPa Class 4 Resistance to penetration by infective agents due to mechanical contact with substances containing contaminated liquids - ISO 22610 (test microorganism: staphyloc occus aureus) Class 6: t > 75 Class 6 Resistance to penetration by contaminated liquid aerosols - ISO DIS 22611 (test microorganism: staphylococcus aureus) Class 3: log > 5 Class 3 Resistance to penetration by contaminated solid particles - EN ISO 22612 (test microorganism: spores of Bacillus subtilis) Class 3: ≤ 1 Class 3 EN ISO 13688:2013 Test Requirement Result /Class/Conformity pH (EN 340 – ISO 3071) 3.5 > pH > 9.5 Pass Classification according to EN 14325 STERILE IRRADIATED Available with Feet Attached , Style Code 2599

21. 21 www.chemsplash.com websales@chemsplash.com +44 (0) 1942 885060 Tyvek ® Accessories Type 5/6 Fabric Chemsplash.com supply a range of Type PB(6-B) Tyvek Accessories Range Includes Valve Covers Spray Gun Covers Cage covers, Garment Covers Artefact Covers Rail Covers Robot Covers Oversleeves Overshoes Boots Lab coats (stud / zipfasten) Aprons 1. Tyvek ® Surgeons Gown Style Code: 6245 ● Tyvek Type 5B&6B PB Material ● Partial Body Protection ● Knee Length ● Elasticated Cuffs ● Tie Back ● Anti-Static Material ● Non-Linting 2. Tyvek ® Ankle Length Surgeons Gown Style Code: 6251 ● Tyvek Type 5B&6B PB Fabric ● Ankle Length ● Elasticated Cuffs ● Tie Back ● Anti-Static Material ● Non-Linting 3. Tyvek ® Zip Fasten Lab coat Style Code: 2550 ● Tyvek Type 5B&6B PB Fabric ● Zip Fasten Front ● Elasticated Cuffs ● Fold Over Collar ● Anti-Static Material ● Non-Linting 4. Tyvek ® Stud Fasten Lab coat Style Code: 2548 ● Tyvek Type 5B&6B PB Fabric ● Stud Fasten Front ● Elasticated Cuffs ● Fold Over Collar ● Anti-Static Material ● Non-Linting 7. Tyvek ® Elasticated Oversleeves Style Code: 2554 ● Tyvek Type 5B&6B PB Fabric ● Elasticated At Both Ends ● 42cm In Length ● Anti-Static Material ● Non-Linting 5. Tyvek ® Jacket With Collar Style Code: 6187 ● Tyvek Type 5B&6B PB Fabric ● Stud Fastening ● Fold Down Collar ● Open Cuff ● Anti-Static Material ● Non-Linting 6. Tyvek ® Elasticated Trousers Style Code: 6199 ● Tyvek Type 5B&6B PB Fabric ● Elasticated Waist ● Anti-Static Material ● Non-Linting Sterile Irradiated Version available on request STERILE IRRADIATED

20. 20 www.chemsplash.com websales@chemsplash.com +44 (0) 1942 885060 1. Tyvek ® 500 Xpert Coverall Type 5/6 Style Code: 6169 ● Tyvek Type 5/6 Fabric ● Soft And Comfortable ● Elasticated Hood ● One Way Zip ● Anti-Static ● Non-Linting 2. Version with Collar (no hood) Style Code: 6062 3. Version with Socks/Feet Style Code: 2546 4. Tyvek ® 600 Plus Coverall with Taped Seams - Type 4/5/6 Style Code: 6155 ● Cat III Type 4/5&6 Coverall ● With Taped Seems ● Adhesive Zip & Chin Flap ● Elasticated Waist, Wrists and Ankles ● 3 Piece Hood ● Exellent Tensile Strenght and Durability ● Anti-Static ● Non-Linting 5. Version with Socks/Feet Style Code: 6168 6. Tychem ® 2000 C Chemical Coverall - Type 3/4 Style Code: 6121 ● Cat III Type 3/4 ● Flexible And Light weight ● Excellent Tear Resistancy ● Elasticated Facial Opening ● Stitched And Overtaped Seams 7. Version with Socks/Feet Style Code: 6119 8. Tychem ® C Shin Length Apron Style Code: 6264 9. Tychem ® C Bib Apron Style Code: 6265 10. Tychem ® 6000 F Coverall with Taped Seams Type 3/4 Style Code: 6127 ● Cat III Type 3/4 ● Flexible And Lightweight ● Excellent Tear Resistancy ● Elasticated Facial Opening ● Elasticated Cuffs And Ankles ● Stitched And Overtaped Seams ● Double Self Adhesive Zipper Flap ● 100% Particle Barrier ● Anti-Static & Non-Linting 11 Version with Socks/Feet Style Code: 6139 DuPont TM Coveralls Tyvek ® , Tychem ® Sterile Irradiated Version available on request STERILE IRRADIATED

24. 24 www.chemsplash.com websales@chemsplash.com +44 (0) 1942 885060 Minimal Risk Accessories Category I Polypropylene & CPE 4. Disposable 10 Micron Polyethlene Apron Style Code: 2500 ● Disposable Polyethlene Apron ● Flat Pack of 100 Colours Available: Blue █ White █ Red █ Yellow █ 4.01 15 Micron Embossed Version ( Blue only) - Code: 2764 1. Polypropylene Disposable Coverall Style Code: 2523 ● 30GSM Non-Woven Polyproplene ● Zip Front ● Elasticated Wrist/Ankle ● Hood ● Suitable for Hygiene Rules/ Food Processing ● Clean Areas/Disposal Operations Colours Available: Blue █ White █ 2. Visitor's Polypropylene Lab Coat Style Code: 2515 ● 30GSM Polyethylene Fabric ● Velcro Closure ● With Fold Over Collar ● Elasticated Cuffs ● Ideal For Non Hazardous Environments ● Ideal For Food Industry Colours Available: Blue █ White █ Red █ 3. Visitor's Polyethylene Lab Coat Style Code: 2543 ● 30GSM Polyethylene Fabric ● Stud Fastening with Fold Over Collar ● Elasticated Cuffs ● Ideal For Non Hazardous Environments ● Ideal For Food Industry Colours Available: Blue █ White █ 5. Polypropylene Boxer Shorts 50x37cm Style Code: 2784 (White only) ● 50GSM Polypropylene Fabric ● Elasticated waist ● Available in one size 6. Polypropylene Socks Style Code: 2787 ● 50GSM Polypropylene Fabric ● 24x18x18x36cm ● Flat pack of 100 7. Polyproplyene Overboots Style Code: 2785 ● 50GSM Polypropylene Material ● 2 Polypropylene Ties ● Overlock Seams ● 41x46x28cm

22. 22 www.chemsplash.com websales@chemsplash.com +44 (0) 1942 885060 4. Tyvek ® Tie Fasten Overboot Style Code: 6393 ● Tyvek Type 5B&6B PB Fabric ● Elasticated Top & Tie Ankles ● Anti-Static Material ● Non-Linting 5. Tyvek ® Slip-Resistant Overboot Style Code: 2566 ● Tyvek Type 5&6PB Fabric ● PVC Slip-Resistant Sole ● Shin Height ● Anti-Static Material ● Non-Linting 6. Tyvek ® 16” Elasticated Overshoes Style Code: 2561 ● Tyvek Type 5&6 PB Fabric ● Anti-Static Material ● Non-Linting 1. Tyvek ® Slip-Resistant Overshoe With PVC Sole Style Code: 2563 ● Tyvek Type 5&6 PB Fabric ● Slip-Resistant PVC Sole ● 16" In Length ● Anti-Static Material ● Non-Linting 2. Tyvek ® Polyplax Slip-Resistant Overshoe Style Code: 6378 ● Tyvek Type 5PB & 6PB Fabric ● Elasticated Ankles ● Slip-Resistant Robust Polyplax Sole ● 16" In Length ● Anti-Static Material ● Non-Linting 3. Individually Wrapped Version Style Code: 6379 7. Tyvek ® Cape Hood Style Code: 2559 ● Tyvek Type 5&6B PB Fabric ● Cape Style Fit ● Elasticated Face ● Anti-Static Material ● Non-Linting 8. Tyvek ® Cape Hood With Visor Style Code: 6355 ● Tyvek Type 5&6PB Fabric ● Large Clear Flat Visor ● Cape Style Fit ● Elasticated Neck ● Anti-Static Material ● Non-Linting 9. Tyvek ® Spray Gun Cover Style Code: 6441 ● Tyvek Type 5 & 6 Fabric ● Stud Fastening ● Anti-Static Material ● Non-Linting Sterile Irradiated Version available on request STERILE IRRADIATED

15. 15 www.chemsplash.com websales@chemsplash.com +44 (0) 1942 885060 AG MAX Type 4B/ 5B/6B Style Code: 2658 The Chemsplash AG MAX is made from a 65GSM microporous laminated Cat III Type 4B, 5B & 6B fabric. All seams are taped offering a stronger more effective barrier to liquids and particulate. Chemplash AG MAX fabric is both anti-static to EN1149-5: 2018 and is resistant to infectious agents to EN14126, complying with the highest resistance to viral and bacterial infection. This suit is an ideal choice for pharmaceutical, cleanroom, semi-conductor manufacturing and infection contamination control. Features ● 65GSM dark green Microporous Laminate Fabric ● Fully Taped Seams ● Three Piece Hood ● Elasticated Cuffs with Thumb Loops ● Elasticated Hood, Back & Ankles ● Two Way Zip with Zip Flap ● Silicone & Latex Free ● Low Linting ● Anti Static Suitable Applications Agriculture General Paint Spraying Pharmaceutical Industries Medical Use with Pesticides Fibreglass Product Manufacturing Boat & Ship Building Mining Emergency Response Colours Available | Green with Grey Taped Seams Sizes in CMs in compliance with EN340 Size Height Chest S 160-165 89-93 M 163-168 93-98 L 167-172 101-106 XL 173-178 108-114 XXL 176-181 116-122 XXXL 185-190 124-130 EN14605 TYPE 4B EN13982-1 TYPE 5B EN13034 TYPE 6B EN1073-2 NUCLEAR PARTICLE Class 3 EN 1149-5:2018 Anti-static EN14126 Infective Agents OUR NEW DIN 32781 SUIT! Performance of whole suit Test Requirement Result /Class/Conformity Resistance to liquid penetration - Spray test Tipo 4 (EN ISO 17491-4 met. A – EN 14605) Pass Resistance to liquid penetration - Spray test Tipo 6 (EN ISO 17491-4 met. A – EN 13034) Pass Resistance to aerosol penetration - Inward leakage Tipo 5 (EN ISO 13982-2 – EN ISO 13982) IL 82/90 ≤ 30%, TILS 8/10 ≤ 15% Pass Nominal protection factor (EN ISO 13982-2 – EN 1073-2) TIL E % 3, TIL A % 2, Fpn 50 Class 2 Seams: permeation by liquids (EN ISO 6529 - EN14605) Class 1: > 10 min H 2 SO 4 30% : Class 1 Seams: strength (EN ISO 13935-2) Class 4: > 125 N Class 4 Performance of fabric Test Requirement Result /Class/Conformity Resistance to penetration to liquid (EN ISO 6530 – EN 13034) Class 3: < 1% Class 2: < 5% Class 1: < 10% H 2 SO 4 30%: class 3 NaOH 10%: class 3 o-xilene: class 3 Butan-1-ol: class 3 Repellency to liquid (EN ISO 6530 – EN 13034) Class 3: > 95% Class 2: > 90% Class 1: > 80 H 2 SO 4 30%: class 3 NaOH 10%: class 3 o-xilene: class 2 Butan-1-ol: class 3 Abrasion Resistance (EN 530 - method 2) Class 3: > 500 cycles Class 3 Trapezoidal tear resistance (EN ISO 9073-4) Class 2: > 20 N Class 2 Tensile strength (EN ISO 13934-1) Class 1: > 30 N Class 1 Puncture resistance (EN 863 - EN 13034) Class 2: > 10 N Class 2 Flex cracking resistance (EN 7854) Class 6: > 100 000 c. Class 6 Permeation by liquids (EN ISO 6529 - EN 14605) Class 1: > 10 min H 2 SO 4 30% : Class 1 Electric surface resistance (ANSI/ESD STM 2.1:2013 – test condi tion EN 1149-1) ≤ 2.5 x 10 9 Pass EN 14126:2003 Test Requirement Result /Class/Conformity Resistance to penetration by blood-borne pathogens - phi-x174 b acteriophage test - ISO 16603/16604 Class 6: 20 kPa Class 6 Resistance to penetration by Agentes Infecciosos due to mechanical contact with substances containing contaminated liquids - ISO 22610 (test microorganism: staphyloc occus aureus) Class 6: t > 75 Class 6 Resistance to penetration by contaminated liquid aerosols - ISO DIS 22611 (test microorganism: staphylococcus aureus) Class 3: log > 5 Class 3 Resistance to penetration by contaminated solid particles - EN ISO 22612 (test microorganism: spores of Bacillus subtilis) Class 3: ≤ 1 Class 3 EN ISO 13688:2013 Test Requirement Result /Class/Conformity pH (EN 340 – ISO 3071) 3.5 > pH > 9.5 Pass Classification according to EN 14325 Test in according to DIN 32781 Result Class Water Vapour Resistance (EN 11092) 18.2 m²Pa/W Class 3 Water Penetration (EN 20811) Water Penetration (EN 20811) 29.811,4 Pa - *Resistance to penetration by sprayed liquid chemicals, emulsio ns and dispersions (EN 14786) Betanal Expert n.d - Folicur n.d - Amistar n.d - Pirimor Granulat n.d - U 46 D-Fluid n.d - *n.a.: The active ingredient of the spraying liquid could not b e detected on the absorbens material (benchkote) with the extraction and detection method (HPLC-DAD) to be used. Limit va lue see above. Betanal Expert. Active ingredient. Phenmedipham (75 g/L)-Concentration for application 7,5 mL concentrate per liter praying liquid (aqueous) – Concentration of active ingredient for spraying liquid: 560 mg/ L. Folicur. Active ingredient. Tebuconazole (250 g/L)-Concentration for application 5 mL concentrate per liter praying liquid (aqueous) – Concentra - tion of active ingredient for spraying liquid: 1250 mg/L. Amistar. Active ingredient. Azoxystrobin (250 g/L)-Concentration for application 5 mL concentrate per liter praying liquid (aqueous) – Concentra - tion of active ingredient for spraying liquid: 1250 mg/L. Pirimor Granulat. Active ingredient. Piricarb (500 g/kg)-Concentration for application 1,5 g concentrate per liter praying liquid (aqueous) – Concen - tration of active ingredient for spraying liquid: 750 mg/L. U 46 D-fluid . Active ingredient. 2,4-D-DMA-Salt (500 g/L)-Concentration for application 5 mL concentrate per liter praying liquid (aqueous) – Concentration of active ingredient for spraying liquid: 2400 mg /L. DIN 32781 Protects Against Pesticides

23. 23 www.chemsplash.com websales@chemsplash.com +44 (0) 1942 885060 ● Adjustable Stud Front Fastening ● Adjustable Back Studs For Improved Fit ● Internal Facing Stud for Optional Face Mask ● Crown and Hem Bound for Added Protection ● Twin Needled Stitching ● All fabric Edges Heat Sealed 1. Lab Coat Lancer Style Style Code: 5734 ● Concealed Nylon Zip Lancer Style Fastening ● One Piece Folded Stand Collar With Stud ● Set in Sleeves ● Knitted Polyester Cuffs ● I nternal Pocket ● Twin Needled Stitching ● All fabric Edges Heat Sealed ● Suitable for: Autoclaving, Gamma Irradiation & Industrial Washing 2. Lab Coat with Front Zip Style Code: 5736 ● Concealed Nylon Zip Fastening with Stud At Top ● Mandarin Collar ● Set in Sleeves ● Polyester Knitted Cuffs ● Twin Needled Stitching ● All Fabric Edges Heat Sealed ● Suitable for: Autoclaving, Gamma Irradiation & Industrial Washing 3. Style Code: 5737 4. Cleanroom Autoclave Bag Style Code: 5563 ● Ideal For Tracking And keeping Garment Sets Together ● Nylon Zip Closure ● Internal Pocket Divider ● Double Hang Loop ● ID Patch Label To Back Of Bag ● Twin Needle Stitching ● All Fabric Edges Sealed ● Suitable for: Autoclaving, Gamma Irradiation & Industrial Washing Colours Available: Blue, White, Navy 5. Cleanroom Lint Free Wipe Style Code: 4867 ● Cleanroom Lint Free Wipe ● 305mm x 355mm 6. White Version Style Code: 4916 7. Sontara MicroPure AP All Purpose Cleanroom Wipes Style Code: 5018 ● Micropure All Purpose Wipes ● Extreme Low-Lint Particle Generation ● Highly Absorbent ● Double Packed ● 9x9” Size ● 300 Wipes per Pack ● Non-Sterile 8. Irradiated Version Style Code: 5019 Cleanroom Coveralls & Accessories Colours Available: Blue █ White █ Navy █ Green █ Sizes in CMs Size To Fit Crown S 49 M 52 L 55 XL 58 XXL 61 Sizes in CMs Size To Fit Chest XS 84-88 S 92-96 M 100-104 L 108-112 XL 116-120 XXL 124-128 XXXL 132-136 Colours Available: Blue █ White █ Navy █ Green █ Cleanroom Hood 9. 100 Critical Cleanroom Wipes Style Code: 5013 ● Suitable for: Autoclaving, Gamma Irradiation & Industrial Washing ● Low-Linting ● Low-Shedding

app_image_512_50x50

To install this Web App in your iPhone/iPad press pwa_icon and then Add to Home Screen.

Safety For Everybody

Stay safely updated with the latest news and knowledge within PPE and work environments