IDS damper PPESLL-115 tds

Fall protection / Documentation

Share on Social Networks

Share Link

Use permanent link to share in social media

Share with a friend

Please login to send this document by email!

Embed in your website

Select page to start with

1. TECHNICAL DATA SHEET PPESLL-115 TDS19 Damper Technical Data Sheet TDS19 ISSUE 05 Inline Damper . The Inline Damper is used as an energy reducing component in the Checkline system when fitted without TopFix posts. It is fitted at the end [with a Loadcell at the other end] and secured to the cable using an approved crimper. Alternatively the Damper can be connected to the wire rope via a swageless adjuster (PPESLL-110A) negating the need for a crimper. 500mm [closed] - 600mm max adjustment 125mm - 175mm 300mm Pin Ø 13mm 14mm 23mm 64mm Damper Unit . The rubber damper unit reduces load forces by up to 40%. Aluminium Alloy . The damper body is manufactured from Aluminium alloy to reduce weight. System Integration . The loadcell can be installed by crimping to the wire rope or via a swageless adjuster. Toggle Fork .. The toggle fork allows for quick and simple connection to an end post or end anchor.

2. Using fall arrest equipment is only a part of working safely at heights; get accredited height safety training from HART. For more information visit www.h-a-r-t.co.uk Damper Technical Data Sheet ordering information TDS19 ISSUE 05 CHECK US OUT www.checkmateuk.com The information on this data sheet is for marketing purposes only and Checkmate reserves the right to amend at any time without notice. The information must not be relied on for use, which must be obtained from the product marking and user information. Part No. Description Weight  PPESLL-115 Damper 3.0kg DISCLAIMER – COMPONENTS MUST BE USED AS PART OF A COMPLETE CHECKMATE CHECKLINE SLL SYSTEM, COMPRISING OF CHECKMATE COMPONENTS ONLY. STRUCTURAL ENGINEER APPROVAL IS REQUIRED BY BUILDING OWNER. SPECIFYING AND INSTALLING CHECKLINE REQUIRES TRAINING AND WRITTEN APPROVAL FROM CHECKMATE – CONTACT CHECKMATE FOR DETAILS. In the event of a fall on the Checkline system, the Damper unit will reduce the high energy levels created by up to 40%. Inline dampers prevent ultimate extremity load build thus protecting the weakest link. specification  Anchorage Connection 13mm stainless connector secured with split  pin/ring.  Wire Rope Connection Connect to 8mm 7x7 or 1x19 stainless steel (316)  wire rope by crimping with Checkmate approved  battery operated crimper. Alternatively the Damper  can be connected to the wire rope via a swageless  adjuster (PPESLL-110A) negating the need for a  crimper.  Weight 3.0kg  Body Al. Alloy 6082 T6 - Clear Anodised  Damper Rod & End Caps Stainless Steel  Damper Rubber  Swage Adjuster Stainless Steel principal materials  These components form part of the Checkmate  EN795 approved system. standards

Views

  • 123 Total Views
  • 113 Website Views
  • 10 Embeded Views

Actions

  • 0 Social Shares
  • 0 Likes
  • 0 Dislikes
  • 0 Comments

Share count

  • 0 Facebook
  • 0 Twitter
  • 0 LinkedIn
  • 0 Google+