S200+Technical Data Sheet

Share on Social Networks

Share Link

Use permanent link to share in social media

Share with a friend

Please login to send this document by email!

Embed in your website

Select page to start with

4. Important Notice 3M does not accept liability of any kind, be it direct or consequential (including, but not limited to, loss of profits, business and/or goodwill) arising from reliance upon any information herein provided by 3M. The user is responsible for determining the suitability of the products for their intended use. Nothing in this statement will be deemed to exclude or restrict 3M’s liability for death or personal injury arising from its negligence. Spare Parts and Accessories Part No. Description S-212 Regulator S-222 Breathing Tube C-340 Overflow Valves C-231 Spray Gun Adaptor FCB-01 Flow Check Bag 301-00-62P5 Belt 308-00-30P 10m Standard Duty CAST 308-00-31P 30m Standard Duty CAST 308-00-40P 7.5m Light Duty CAST 308-00-72P 10m Standard Duty, anti-static, heat resistant CAST 530-12-81P3 Socket and Plug set – Rectus 95 312-03-01P3 2-way Manifold 312-03-00P3 3-way Manifold ACU-03 Aircare Filtration Unit – Wall Mounted ACU-04 Aircare Filtration Unit – Free standing 105 Cleaning Wipes 107 Storage Bag EU_Master_01 3M is a trademark of 3M company. Please recycle. © 3M 2014. All rights reserved. 19042 Company name Address line 1 Address line 2 Region / City Country Tel Number Web URL Personal Safety Division EMEA Region 3M Centre, Cain Road, Bracknell Berkshire RG12 8HT United Kingdom Tel: +44 (0) 1344 858000 www.3M.eu/safety

2. Use Limitations The S-200+ Supplied Air Respirator system should not be used in the following conditions: • In atmospheres containing less than 19,5 % oxygen • Confined spaces (lack of ventilation) • When the risk is considered to be immediately dangerous for life or health (IDLH) • Where the contaminant concentration is above the Threshold Limit Value defined for the facepiece used. Compatibility The 3M™ Respirator System S-200+ can be used as a standard airline respirator or in dual-mode with a range of 3M™ filters that provide continuous protection when the air supply is disconnected. The S-200+ System can be combined with a wide range masks and filters: Facemasks Half Face Masks 3M™ Half Face Masks 6000 Series 3M™ Half Face Masks 6500 Series 3M™ Half Face Masks 7000 Series 3M™ Half Face Masks 7500 Series Full Face Masks 3M™ Full Face Masks 6000 Series 3M™ Full Face Masks 7907 Filters Particulate Filters 2135 Particulate Filter (P3R) 2138 Particulate Filter + nuisance vapours (P3R) 5935* Particulate (P3R) 501 Filter Retainer Gas and Vapour Filters 6051 Organic Gases and Vapours (boiling point >65°C) up to 1000ppm (A1) 6054 Ammonia and Ammonia based Gases and Vapours (K1) 6055 Organic Gases and Vapours (boiling point >65°C) up to 5000ppm (A2) 6057 Combination Organic Gases and Vapours (boiling point >65°C), Inorganic and Acid Gases (ABE1) 6059 Combination Organic Gases and Vapours (boiling point >65°C), Inorganic, Acid and Ammonia based Gases (ABEK1) 6075 Organic Gases and Vapours (boiling point >65°C) plus formaldehyde (up to 10ppm) ( A1) Combination Filters 6096 Organic Gases and Vapours (boiling point >65°C), Mercury and Particulates ( A1HgP3R) * 5000 Series Filters can be used with 6000 Series Filters for combined gas and particulate protection in conjunction with a 501 Filter Retainer.

1. 3M ™ Supplied Air Respirator System S200+ Product Description The 3M™ Supplied Air Respirator System S-200+ is a comfortable and versatile supplied air respirator system for use with the 3M™ 6000 and 3M™ 7000 Series Half and Full Face Masks. The S-200+ System by 3M can be used as a standard airline respirator system or in dual-mode with filter back-up when air supply is disconnected. • Low profile, narrow-bore breathing tube for ease of movement and helps to reduce interference with your work • Robust, proven bayonet connection to the facepiece and filter provides easy fitting with confidence of security • The 3M™ S-212 Air Regulator comprises a lockable airflow adjustment knob and NEW double action couplings for secure use with enhanced confidence in protection • Lightweight and balanced system • Easy to maintain, spare parts are quick, easy and intuitive to replace • Highest level of protection for continuous flow supplied air respirators when fitted to a full face mask • A wide range of air tools can be fitted to the 3M™ S-200+ Supplied Air Respirator System eliminating the need for multiple airlines when working Materials Listing Component Material Housing and belt bracket Polypropylene Outlet fitting Brass Inlet fitting Stainless Steel Breathing Tube TPE Belt Polyester Applications The S-200+ System, when used with an approved 3M™ Face mask provides respiratory protection against: • Particles e.g. fine dusts, aerosols, paint spray or metal fume • Gases and Vapours • Particles, gases and vapours combined Application Typical Industry Spray Painting General Transport Automotive & Aerospace Metal Fabrication Shipbuilding Oil and Gas Glass Fibre Fabrication Boat building Wind Turbine Manufacturing Powder Coating Metal Fabrication Material Handling Pharmaceutical Chemical Agrochemical Laboratory Datasheet Technical

3. Auxiliary Air Tools A wide range of air tools can be fitted to the 3M™ S-200+ Supplied Air Respirator System eliminating the need for multiple airlines when working. The chart below shows the amount of air available for Auxiliary Air Tool use when the 3M™ S-200+ Supplied Air System is set to its minimum flow setting. 3M recommends that Auxiliary Air tools are only used in combination with the S-200+ Supplied Air System between 4.5 and 7 Bar. Note: • Increased flow to the facepiece will reduce the air available to the Auxiliary air tool at any given pressure • Always ensure that the Air tool to be used with the S-200+ is compatible for use and can deliver the performance required 600 0 5.25 4.5 6 6.5 7 100 200 300 400 500 700 Total available air (litres per minute) Pressure Range for Auxiliary Air Tool Use (Bar) Air tool Air supply Facepiece Air supply Also Available from 3M The 3M™ Accuspray™ System gives like-new spray gun performance on demand. The innovative technology gives efficient and economical application of material with each atomising head delivering a large usable pattern, with very low overspray and exceptional atomisation. This system is compatible for use with the 3M™ S-200+ Supplied Air Respirator system. Please see all information for use of the 3M™ Accuspray™ System before use and for full performance details Technical Data Specifications Nominal Protection Factor (NPF) 3M Half Face masks (Class 3A/B) = 200 3M Full Face masks (Class 4A/B) = 2000 Inlet Pressure Pressure range: 3 – 7.0 Bar Pressure range (with Auxiliary air tool connected): 4.5-7.0 Bar Maximum Pressure: 10 Bar Outlet Flow Characteristics Manufacturer’s Minimum Design Flow (MMDF): 120l/min Maximum Flow: >350l/min Storage Conditions -10°C to +50°C <90% Relative Humidity Operating temperature 0°C to +40°C <90% Relative Humidity Connections Inlet Port: CEJN 346 Auxiliary Port: ¼ inch BSP The compressed air used to operate the S-200+ Regulator must comply with the quality requirements of EN12021 Standards and Approval The S-200+ Supplied Air Respirator System has been tested and approved to EN14594:2005. When used with a 3M™ recommended Full Face mask the product meets the requirements for a class 4A/B device. When used with a 3M™ recommended Half Face mask the product meets the requirements for a class 3A/B device. The S-200+ Supplied Air Respirator System has also been assessed in accordance with the requirements of the ATEX directive and in accordance with EN13463-1 for non-electrical equipment*. The equipment is suitable for use in IIB 2GD environments under certain conditions. Please see relevant user instructions for further details. The 3M™ Supplied Air Respirator System S-200+ meets the Basic Safety Requirements under Articles 10 and 11B of the EC Directive 89/686/EEC and thus carries the CE mark. The product was examined at the design stage by BSI, Kitemark Court, Davy Avenue, Knowlhill, Milton Keynes, MK5 8PP, UK (Notified Body number 0086). * Valid only when fitted with a 3M™ 308-00-72P Antistatic Compressed Air Supply Tube

Views

  • 281 Total Views
  • 245 Website Views
  • 36 Embeded Views

Actions

  • 0 Social Shares
  • 0 Likes
  • 0 Dislikes
  • 0 Comments

Share count

  • 0 Facebook
  • 0 Twitter
  • 0 LinkedIn
  • 0 Google+