True

3M Protective Coverall 4570 TDS

ID: 2320
Views
368 Total Views
0 Members Views
368 Public Views
Share on Social Networks
Share Link
Use permanent link to share in social media
Share by mail

Please login to share this document by email.

Embed in your website
Select page to start with

4. 3M ™ Protective Coverall 4570 Permeation test results Chemical Fabric Seam CAS number EN 374-3 classified to EN 14325 ASTM F739 classified to ANSI103 EN 374-3 classified to EN 14325 ASTM F739 classified to ANSI103 1ug/cm 2 0.1ug/cm 2 1ug/cm 2 0.1ug/cm 2 2-(2-aminoethoxy) ethanol 98% 929-06-6 Class 6 Not tested Class 6 >480 (H) 2,4-Difluoroanaline 99% 367-25-9 Class 3 Not tested Class 1 0 mins 2-Chloroethanol 99% 107-07-3 Class 6 Not tested Class 6 0 mins 2-Ethylhexanoic acid 99% 149-57-5 Class 6 Not tested Class 6 102 mins (L) Acetic Acid 30% (ethanoic acid) 64-19-7 Class 6 Not tested Class 6 >480 (H) Ammonium hydroxide 30% 1336-21-6 Class 6 Not tested Class 1 0 mins Aniline 99% (phenylamine, aminobenzene) 62-53-3 Class 5 Not tested Class 5 Average 11 mins Dimethyl sulphate 98% 77-78-1 Class 6 Not tested Class 6 >480 (H) Dimethylformamide (DMF) 68-12-2 Class 6 >480 (H) Class 6 Average 54 mins (L) Ethylene glycol 99.5% 107-21-1 Class 6 Not tested Class 6 >480 (H) Formaldehyde 10% 50-00-00 Class 6 Not tested Class 6 >480 (H) Formic acid 96% 64-18-6 Class 6 Not tested Class 6 Average 16 mins Hydrazine monohydrate 98% 7803-57-8 Class 6 Not tested Class 6 >480 (H) Hydrobromic acid 48% 10035-10-6 Class 6 Not tested Class 6 >480 (H) Hydrochloric acid 37% 7647-01-0 Class 4 Not tested Class 4 Average 36 mins (L) Hydrofluoric acid (71-75wt%) 7664-39-3 Class 4 Not tested Class 5 Average 132 mins (M) Hydrofluoric acid 48% 7664-39-3 Class 6 Not tested Class 6 >480 (H) Isopropyl alcohol 99.5% 67-63-07 Class 6 Not tested Class 6 Average 9 mins Mercuric chloride sat. soln. 7487-94-7 Class 6 Not tested Class 6 >480 (H) Mercury 92786-62-4 Class 2 Not tested Class 6 >480 (H) Methanol 67-56-1 Class 6 0 mins Class 6 0 mins Nitric acid 70% 7694-37-2 Class 6 Not tested Class 6 Average 7 hours (M) Phenol 85% soln. 108-95-2 Class 6 Not tested Class 6 >480 (H) Phosphoric acid 85% 7664-38-2 Class 6 Not tested Class 6 >480 (H) Potassium chromate (saturated soln.) 7789-00-6 Class 6 Not tested Class 6 >480 (H) Sodium bisulphate 40% soln. 7681-38-1 Class 6 Not tested Class 6 >480 (H) Sodium fluoride saturated soln. 7681-49-4 Class 6 Not tested Class 6 >480 (H) Sodium hydroxide 40wt% 1310-73-2 Class 6 Not tested Class 6 >480 (H) Sodium hypochlorite (13% chlorine) 7681-52-9 Class 6 Not tested Class 6 >480 (H) Sulfuric acid 30wt% 7664-93-9 Class 6 Not tested Class 6 >480 (H) Sulfuric acid 93.1 wt% 7664-93-9 Class 6 >480 (H) Class 6 >480 (H) Zinc bromide saturated soln. 7699-45-8 Class 6 Not tested Class 6 >480 (H) Data given here is: for information only; not certified product claims; based on one sample only; based on lab conditions; subject to change. Product supplied may show variation. Breakthrough times are not safe wear times. Permeation rates increase with temperature. Permeation testing does not assess: degradation; mechanical defects; product design/fit.

3. 3M ™ Protective Coverall 4570 Technical data The following tables show the performance of this product when tested under laboratory conditions. Please note that the tests may not reflect the reality of use and do not account for factors such as excessive heat and mechanical wear. The data listed in the tables below is based on one sample only. Test Standard/test method Class/result Abrasion resistance (visual assessment) EN530:2010 Class 5 Flex cracking (visual assessment) ISO 7854:1995 Class 1 Tear resistance ISO 9073-4:1997 Class 2 Tensile strength EN ISO 13934-1:1999 Class 1 Puncture resistance EN 863:1995 Class 2 Bursting resistance EN ISO 13938-1 Class 2 Resistance to ignition EN 13274-4:2001 Pass Resistance to blocking EN 25978:1990 No blocking Seam strength EN ISO 13935-2:1999 Class 3 Repellency to liquids – 30% H 2 SO 4 EN ISO 6530:2005 Class 3 of 3 Liquid penetration resistance – 30% H 2 SO 4 EN ISO 6530:2005 Class 3 of 3 Repellency to liquids – 10% NaOH EN ISO 6530:2005 Class 3 of 3 Liquid penetration resistance – 10% NaOH EN ISO 6530:2005 Class 3 of 3 Repellency to liquids – n-heptane EN ISO 6530:2005 Class 2 of 3 Liquid penetration resistance – n-heptane EN ISO 6530:2005 Class 3 of 3 Repellency to liquids – Isopropanol EN ISO 6530:2005 Class 3 of 3 Liquid penetration resistance – Isopropanol EN ISO 6530:2005 Class 3 of 3 Anti-static coating on inside only EN 1149-1:2006 Pass Radioactive particulates EN 1073-2:2002 TIL Class 2 of 3 Biological protection EN 14126:2003 Pass Synthetic blood penetration resistance ISO 16603:2004 Pass 20kPa Blood-borne pathogen penetration resistance ISO 16604:2004 Class 6 Contaminated solid particle penetration resistance ISO 22612:2005 Class 3 of 3 Contaminated liquid aerosol penetration resistance ISO/DIS 22611:2003 Class 3 of 3 Wet bacteria penetration resistance EN ISO 22610:2006 Class 6 The standards EN 13034:2005, EN 14325 and EN ISO 13982-1:2004, and EN 1073-2:2002 define performance classes. The maximum Class is 6 unless otherwise noted.

5. 3M ™ Protective Coverall 4570 Personal Safety Division 3M Centre Cain Road, Bracknell Berkshire RG12 8HT www.3M.eu/safety 3M is a trademark of 3M Company. Please recycle. Printed in the United Kingdom. © 3M 2020. All rights reserved. OMG70835 Test methods referenced are EN 374 and ASTM F-739. EN 374 reports the breakthrough detection time at a permeation rate of 1.0 μg/cm 2 and refers to the EN 14325 classification in the table. ASTM F-739 reports the normalised breakthrough detection time at a permeation rate of 0.1 μg/cm 2 and refers to the ANSI 103 classification stated in the table. Both normalised permeation rates of 0.1 μg/cm 2 and 1.0 μg/cm 2 are reported in EN ISO 6529. LIMITATION OF LIABILITY: Except as provided above, 3M shall not be liable or responsible for any loss or damage, whether direct, indirect, incidental, special or consequential arising out of the sale, use or misuse of 3M OH&ESD products, or the user’s inability to use such products. THESE REMEDIES SET FORTH HEREIN ARE EXCLUSIVE. EN 14325 Classification ANSI 103 Classification Class 6 >480 mins H >480 mins Class 5 >240 mins M >120 mins Class 4 >120 mins L >30 mins Class 3 >60 mins Class 2 >30 mins Class 1 >10 mins IMPORTANT NOTICE The use of the 3M product described within this document assumes that the user has previous experience of this type of product and that it will be used by a competent professional. Before any use of this product it is recommended to complete some trials to validate the performance of the product within its expected application. All information and specification details contained within this document are inherent to this specific 3M product and would not be applied to other products or environment. Any action or usage of this product made in violation of this document is at the risk of the user. Compliance to the information and specification relative to the 3M product contained within this document does not exempt the user from compliance with additional guidelines (safety rules, procedures). Compliance to operational requirements especially in respect to the environment and usage of tools with this product must be observed. The 3M group (which cannot verify or control those elements) would not be held responsible for the consequences of any violation of these rules which remain external to its decision and control. Warranty conditions for 3M products are determined with the sales contract documents and with the mandatory and applicable clause, excluding any other warranty or compensation.

1. 3M ™ Protective Coverall 4570 Technical Datasheet Description The 3M ™ Protective Coverall 4570 range of coveralls are designed to help protect against hazardous dusts (Type 5), light liquid splashes (Type 6), low pressure liquid sprays (Type 4) and high pressure liquid jets (Type 3). Approvals These products are type examined by SATRA Technology Europe Ltd ., Notified Body number 2777 and audited annually by SGS, Notified Body number 0598. These products are CE marked to the requirements of European Regulation (EU) 2016/425. The CE Certificate and Declaration of Conformity can be reviewed at www.3m.com/Body/certs Comfort and protection Liquid protection Type 3 and Type 4 (EN 14605) and Type 6 (EN 13034) Whole suit full and reduced spray test (EN ISO 17491-3) Dust protection Type 5 (EN ISO 13982-1) Inward Leakage results: Ljmn,82/90 < 30 %; LS,8/10 < 15 % Anti-static Anti-static coating (EN 1149-5:2008) * Nuclear Radioactive particulates (EN 1073-2:2002), Class 2 Biohazard Tested according to EN 14126:2003 (Type 3-B, Type 4-B, Type 5-B, Type 6-B) * All apparel must be suitably grounded for anti-static treatment to be effective. Electrostatic propensity may decrease with wearing time and/or severe conditions. Materials Suit Polypropylene/polyethylene Zipper Metal/nylon/polyester braid Elastic Synthetic rubber (non-latex) Seam tape Polyetheylene Thread Polyester/cotton This product does not contain components made from natural rubber latex.

2. Sizing An appropriate size garment should be selected to allow sufficient movement for the task. Height Chest S 64 – 67 in 164 – 170 cm 33 - 36 in 84 – 92 cm M 66 – 69 in 167 – 176 cm 36 – 39 in 92 – 100 cm L 69 – 71 in 174 – 181 cm 39 – 43 in 100 – 108 cm XL 70 – 74 in 179 – 187 cm 43 – 45 in 108 – 115 cm XXL 73 – 76 in 186 – 194 cm 45 – 49 in 115 – 124 cm 3XL 76 – 78 in 194 – 200 cm 49 – 52 in 124 – 132 cm 4XL 78 – 81 in 200 – 206 cm 52 – 55 in 132 – 140 cm Use limitations Do not use for: Ŕ Contact with heavy oils, sparks or flame, or combustible liquids Ŕ Environments with high mechanical risks (abrasions, tears, cuts) Ŕ Environments with exposure to hazardous substances beyond CE Type 3/4/5/6 certification Ŕ Environments with conditions of excessive heat Limited use Do not wash Do not dry clean Do not bleach Flammable — keep away from sparks or flames Do not iron Single use — do not re-use Do not tumble dry Storage and disposal Ŕ Store in dry, clean conditions in original packaging Ŕ Store away from direct sunlight, sources of high temperature, and solvent vapours Ŕ Store within the temperature range -20°C to +25°C (-4°F to +77°F) and with relative humidity below 80% Ŕ Shelf life is ten (10) years from date of manufacture when stored as stated above Ŕ Replace garments if damaged, heavily contaminated or in accordance with local work practice Ŕ Handle and dispose of contaminated garments with care and in accordance with national regulations Applications and performance Non-Hazardous Particulates Yes Liquid Continuous Contact Yes, if chemical is compatible with suit material † Non-Hazardous Liquid Splash Yes Hazardous Liquid Splash Yes, if chemical is compatible with suit material † Non-Hazardous Liquid Spray Yes Hazardous Liquid Spray Yes, if chemical is compatible with suit material † Hazardous Dusts and Fibres Yes Organic Solvents Yes, if chemical is compatible with suit material † Gases and Vapours No Acids/ Alkalis Yes, if chemical is compatible with suit material † † For additional chemical penetration and permeation data, please call your local 3M Technical Service Representative. Typical applications may include: chemical handling, environmental cleanup, hazardous waste remediation, agriculture. In all cases, a risk assessment should be carried out. Always read product user information. Use limitations and performance data should be considered to ascertain the protection required. If in doubt, contact a safety professional. For more information on 3M products and services please contact 3M. 3M ™ Protective Coverall 4570

app_image_512_50x50

To install this Web App in your iPhone/iPad press pwa_icon and then Add to Home Screen.

Safety For Everybody

Stay safely updated with the latest news and knowledge within PPE and work environments