1. TECHNICAL DATA SHEET TOGGLE END SWAGE TDS67 Toggle End Swage Technical Data Sheet TDS67 ISSUE 04 Using fall arrest equipment is only a part of working safely at heights; get accredited height safety training from HART. For more information visit www.h-a-r-t.co.uk CHECK US OUT w w w . c h e c k m a t e u k . c o m The information on this data sheet is for marketing purposes only and Checkmate reserves the right to amend at any time without notice. The information must not be relied on for use, which must be obtained from the product marking and user information. Part No. Description Weight  PPESLL-113 Toggle End Swage 270g  All Components  Stainless Steel - AISI 304-Electro  Polished Checkmate Checkline II Toggle End Swage . The PPESLL-113 is a connector used to terminate a cable to a post or bracket. The Toggle End Swage is only to be used in short straight systems, For longer systems or systems with multiple corners use PPESLL- 111 to give a greater range of tension adjustment. standards  These components form part of the  Checkmate EN 795 approved system All measurements are in millimetres DISCLAIMER – COMPONENTS MUST BE USED AS PART OF A COMPLETE CHECKMATE CHECKLINE SLL SYSTEM, COMPRISING OF CHECKMATE COMPONENTS ONLY STRUCTURAL ENGINEER APPROVAL IS REQUIRED BY BUILDING OWNER. SPECIFYING AND INSTALLING CHECKLINE REQUIRES TRAINING AND WRITTEN APPROVAL FROM CHECKMATE – CONTACT CHECKMATE FOR DETAILS. ordering information 14 100 33 60 principal materials