True

Visitor Coat 4400 TDS_high_res

ID: 198
Views
121 Total Views
0 Members Views
121 Public Views
Share on Social Networks
Share Link
Use permanent link to share in social media
Share by mail

Please login to share this document by email.

Embed in your website
Select page to start with

1. Technical 4400 Data Sheet Storage and Disposal • Store in dry, clean conditions in original packaging • Store away from direct sunlight, sources of high temperature and solvent vapours • Store within the temperature range -20°C to +25°C (-4°F to +68°F) and with relative humidity below 80% • Shelf life is three years from date of manufacture when stored as stated above • Replace garments if damaged, heavily contaminated or in accordance with local work practice • Handle and dispose of contaminated garments with care and in accordance with applicable regulations Use Limitations Do not wash Do not dry clean Do not bleach Flammable – keep away from sparks or flames Do not iron Single use – do not re-use Do not tumble dry Warnings and Limitations Before use be sure that the product is suitable for the application and fitted correctly. Product must never be altered or modified. Do not use for: • Contact with heavy oils, sparks or flame, or combustible liquids; • Environments with high mechanical risks (abrasions, tears, cuts); • Protection against hazardous substances; • Environments with conditions of excessive heat. 3M ™ Visitor Coat 4400 The 3M™ Visitor Coat 4400 is designed to help protect the wearer against non-hazardous dusts and non-hazardous light liquid splashes where the garment covers. It is made from the same fabric as the 3M™ Coverall 4500 making it soft, breathable and extremely comfortable to wear. Key Features • Elasticated cuffs for a secure fit • Front zip closing (single way) • Low-linting properties • Includes internal pocket on the wearers left hand side (measuring 12cm wide x 13cm high) • Made from the same fabric as the 3M coverall 4500. • Breathable material to help reduce heat build up and promote comfortable wear • Available in both white and blue options Typical Applications • General Maintenance • Catering • Electronics Manufacturing • Laboratories This product is CE Category I for use in low risk applications. A risk assessment should be carried out by a trained safety professional to ensure that appropriate PPE and accessories are selected and worn correctly. For more information, please contact 3M. Materials Visitor Coat 45gsm Polypropylene Zipper Metal / Nylon / Polyester Braid Elastic Synthetic Rubber Thread Polyester / Cotton This product does not contain components made from natural rubber latex. Sizing An appropriate size garment should be selected to allow sufficient movement for the task. Height Chest S 57 – 62 in 144 – 157 cm 28 – 32 in 71 – 81 cm M 60 – 67 in 167 – 176 cm 32 – 36 in 81 – 91 cm L 65 – 70 in 174 – 181 cm 36 – 38 in 91 – 97 cm XL 68 – 73 in 179 – 187 cm 38 – 40 in 96 – 101 cm 2XL 71 – 75 in 186 – 194 cm 40 – 43 in 101 – 109 cm 3XL 73 – 77 in 194 – 200 cm 43 – 46 in 109 – 117 cm 4XL 74 – 78 in 200 – 206 cm 46 – 52 in 117 – 132 cm The Power to Protect Your World SM For more information on 3M products and services please contact 3M. Important Notice This guide is only an outline. Before using any protective clothing or accessories, the wearer must read and understand the user information for each product. Specific country legislation should be observed. If in doubt, contact a safety professional. Selection of the most appropriate PPE and accessories will depend on the particular situation and should only be made by a competent person knowledgeable of the actual working conditions and the limitations of PPE and accessories. Final determination as to the suitability of these products for a particular situation is the employer’s responsibility. This information is subject to revision at any time. If you have questions contact 3M Technical Service. 3M Personal Safety Division 3M United Kingdom plc www.3M.com/PPESafetySolutions 18194

To install this Web App in your iPhone/iPad press and then Add to Home Screen.